Debug Platform Port-Asic - Cisco Catalyst 3030 Command Reference Manual
Blade switch
Hide thumbs
Also See for Catalyst 3030:
- Getting started manual (34 pages) ,
- Getting started (122 pages)
Table of Contents
Advertisement
Appendix B
Cisco Catalyst Blade Switch 3030 Debug Commands
debug platform port-asic
Use the debug platform port-asic privileged EXEC command to enable debugging of the port
application-specific integrated circuit (ASIC) driver. Use the no form of this command to disable
debugging.
Syntax Description
interrupt
periodic
read
write
Though visible in the command-line help strings, the stack keyword is not supported.
Note
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)SEE
Usage Guidelines
The undebug platform port-asic command is the same as the no debug platform port-asic command.
Related Commands
Command
show debugging
78-17262-01
debug platform port-asic {interrupt | periodic | read | write}
no debug platform port-asic {interrupt | periodic | read | write}
Display port-ASIC interrupt-related function debug messages.
Display port-ASIC periodic-function-call debug messages.
Display port-ASIC read debug messages.
Display port-ASIC write debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, see the Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
Cisco Catalyst Blade Switch 3030 Command Reference
debug platform port-asic
B-43
Advertisement
Table of Contents
