Debug Platform Port-Asic - Cisco Catalyst 3750-X Command Reference Manual

Cisco ios release 15.2(1)e and later

Hide thumbs Also See for Catalyst 3750-X:

Table of Contents

Catalyst 3750-X and 3560-X Switch Debug Commands

debug platform port-asic

Use the debug platform port-asic privileged EXEC command to enable debugging of the port

application-specific integrated circuit (ASIC) driver. Use the no form of this command to disable

Syntax Description

Debugging is disabled.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

The undebug platform port-asic command is the same as the no debug platform port-asic command.

When you enable debugging on a switch stack, it is enabled only on the stack master. To enable

debugging on a stack member, you can start a session from the stack master by using the session

switch-number privileged EXEC command. Then enter the debug command at the command-line

prompt of the stack member. You also can use the remote command stack-member-number LINE

privileged EXEC command on the stack master switch to enable debugging on a member switch without

first starting a session.

Related Commands

show debugging

debug platform port-asic {interrupt | periodic | read | stack | write}

no debug platform port-asic {interrupt | periodic | read | stack | write}

Display port-ASIC interrupt-related function debug messages.

Display port-ASIC periodic-function-call debug messages.

Display port-ASIC read debug messages.

Display stacking-related function debug messages.

This keyword is supported only on Catalyst 3750-X switches.

Display port-ASIC write debug messages.

Modification

This command was introduced.

Displays information about the types of debugging that are enabled.

Catalyst 3750-X and 3560-X Switch Command Reference

debug platform port-asic

Catalyst 3560-x