Show Ipv6 Route Updated - Cisco Catalyst 3750-X Command Reference Manual

Cisco ios release 15.2(1)e and later

Hide thumbs Also See for Catalyst 3750-X:

Table of Contents

show ipv6 route updated

Use the show ipv6 route updated command in user EXEC command to display the current contents of

the IPv6 routing table.

This command is not supported on switches running the LAN base feature set.

Syntax Description

Command Modes

Privileged EXEC

Command History

Catalyst 3750-X and 3560-X Switch Command Reference

show ipv6 route [protocol] updated [boot-up] {hh:mm | day {month [hh:mm]} [{hh:mm |

day{month [hh:mm]}]

(Optional) Displays routes for the specified routing protocol using any of

these keywords:

or displays routes for the specified type of route using any of these keywords:

Display the current contents of the IPv6 routing table.

Enter the time as a 2-digit number for a 24-hour clock. Make sure to use the

colons (:). For example, enter 13:32

Enter the day of the month. The range is from 1 to 31.

Enter the month in upper case or lower case letters. You can enter the full

name of the month, such as January or august, or the first three letters of the

month, such as jan or Aug.

Modification

This command was introduced.

Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

interface interface id

Catalyst 3560-x