Cisco Catalyst 3750-X Command Reference Manual page 874
Cisco ios release 15.2(1)e and later
Hide thumbs
Also See for Catalyst 3750-X:
- Software configuration manual (1438 pages) ,
- Message manual (150 pages) ,
- Getting started manual (22 pages)
Table of Contents
Advertisement
snmp-server enable traps
dot1x [auth-fail-vlan |
guest-vlan |
no-auth-fail-vlan |
no-guest-vlan]
entity
envmon [fan |
shutdown | status |
supply | temperature]
flash [insertion |
removal]
fru-ctrl
hsrp
ipmulticast
mac-notification
change
move
threshold
msdp
Catalyst 3750-X and 3560-X Switch Command Reference
2-842
Chapter 2 Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
(Optional) Enable IEEE 802.1x traps. The keywords have these meanings:
auth-fail-vlan—(Optional) Generate a trap when the port moves to the
•
configured restricted VLAN.
guest-vlan—(Optional) Generate a trap when the port moves to the
•
configured guest VLAN.
no-auth-fail-vlan—(Optional) Generate a trap when a port tries to enter
•
the restricted VLAN, but cannot because the restricted VLAN is not
configured.
no-guest-vlan—(Optional) Generate a trap when a port tries to enter the
•
guest VLAN, but cannot because the guest VLAN is not configured.
Note
When the snmp-server enable traps dot1x command is entered
(without any other keywords specified), all the IEEE 802.1x traps are
enabled.
(Optional) Enable SNMP entity traps.
Optional) Enable SNMP environmental traps. The keywords have these
meanings:
•
fan—(Optional) Enable fan traps.
shutdown—(Optional) Enable environmental monitor shutdown traps.
•
status—(Optional) Enable SNMP environmental status-change traps.
•
supply—(Optional) Enable environmental monitor power-supply traps.
•
temperature—(Optional) Enable environmental monitor temperature
•
traps.
(Optional) Enable SNMP FLASH notifications. The keywords have these
meanings:
insertion—(Optional) Generate a trap when a switch (flash) is inserted into
a stack, either physically or because of a power cycle or reload.
removal—(Optional) Generate a trap when a switch (flash) is removed from
a stack, either physically or because of a power cycle or reload.
(Optional) Generate entity field-replaceable unit (FRU) control traps. In a
switch stack, this trap refers to the insertion or removal of a switch in the
stack.
(Optional) Enable Hot Standby Router Protocol (HSRP) traps.
(Optional) Enable IP multicast routing traps.
(Optional) Enable MAC address notification traps.
(Optional) Enable MAC address change notification traps.
(Optional) Enable MAC address move notification traps.
(Optional) Enable MAC address table threshold traps.
(Optional) Enable Multicast Source Discovery Protocol (MSDP) traps.
OL-29704-01
Advertisement
Table of Contents
