Cisco Catalyst 3750-X Command Reference Manual page 453

Cisco ios release 15.2(1)e and later

Hide thumbs Also See for Catalyst 3750-X:

Table of Contents

Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

This example shows how to assign the ingress bandwidths for the queues in the stack. Queue 1 is the

priority queue with 10 percent of the bandwidth allocated to it. The bandwidth ratio allocated to queues

1 and 2 is 4/(4+4). SRR services queue 1 (the priority queue) first for its configured 10 percent

bandwidth. Then SRR equally shares the remaining 90 percent of the bandwidth between queues 1 and

2 by allocating 45 percent to each queue:

Switch(config)# mls qos srr-queue input priority-queue 1 bandwidth 10

Switch(config)# mls qos srr-queue input bandwidth 4 4

You can verify your settings by entering the show mls qos interface [interface-id] queueing or the show

mls qos input-queue privileged EXEC command.

Related Commands

mls qos srr-queue input bandwidth

mls qos srr-queue input buffers

mls qos srr-queue input cos-map

mls qos srr-queue input dscp-map

mls qos srr-queue input threshold

show mls qos input-queue

show mls qos interface

Assigns shaped round robin (SRR) weights to an ingress

Allocates the buffers between the ingress queues.

Maps class of service (CoS) values to an ingress queue or

maps CoS values to a queue and to a threshold ID.

Maps Differentiated Services Code Point (DSCP) values to an

ingress queue or maps DSCP values to a queue and to a

threshold ID.

Assigns weighted tail-drop (WTD) threshold percentages to an

ingress queue.

Displays ingress queue settings.

Displays quality of service (QoS) information.

Catalyst 3750-X and 3560-X Switch Command Reference

mls qos srr-queue input priority-queue

Catalyst 3560-x