Aaa Authentication Dot1X - Cisco Catalyst 3750-X Command Reference Manual

Cisco ios release 15.2(1)e and later

Hide thumbs Also See for Catalyst 3750-X:

Table of Contents

Catalyst 3750-X and 3560-X Switch Cisco IOS Commands

aaa authentication dot1x

Use the aaa authentication dot1x global configuration command on the switch stack or on a standalone

switch to specify the authentication, authorization, and accounting (AAA) method to use on ports

complying with the IEEE 802.1x authentication. Use the no form of this command to disable

authentication.

Syntax Description

Though other keywords are visible in the command-line help strings, only the default and group radius

keywords are supported.

No authentication is performed.

Command Modes

Global configuration

Command History

Usage Guidelines

The method argument identifies the method that the authentication algorithm tries in the given sequence

to validate the password provided by the client. The only method that is truly IEEE 802.1x-compliant is

the group radius method, in which the client data is validated against a RADIUS authentication server.

If you specify group radius, you must configure the RADIUS server by entering the radius-server host

global configuration command.

Use the show running-config privileged EXEC command to display the configured lists of

authentication methods.

aaa authentication dot1x {default} method1

no aaa authentication dot1x {default}

Use the listed authentication method that follows this argument as the default

method when a user logs in.

Enter the group radius keywords to use the list of all RADIUS servers for

authentication.

Modification

This command was introduced.

Catalyst 3750-X and 3560-X Switch Command Reference

aaa authentication dot1x

Catalyst 3560-x