Chapter 4 Replacement Procedures
4.10 Touch Pad
Removing the touch pad
The following describes the procedure for removing the touch pad (See Figure 4-10-1 to 4-
10-3).
1. Peel off the glass tape and disconnect the touch pad flat cable, Fingerprint cable
from the connector on the touch pad.
2. Remove the following screws securing the touch pad plate.
M2x2-I
M2-0.4x2 SUPER THIN HEAD screw
M2.0x3.0 SUPER THIN HEAD screw
3. Remove the touch pad board and touch pad plate.
4. Peel off and remove the touch pad from the cover assembly.
Satellite T130, Satellite Pro T130, and PORTEGE T130Maintenance Manual (960-Q08)
SUPER THIN HEAD screw
x6
x2
x2
4-39