IBM System x3800 Installation Manual page 31

Type 8866

Hide thumbs Also See for System x3800:

Table of Contents

c. Pull out the microprocessor tray until it stops and then reposition your

hands to grasp the body of the tray.

d. Press in on the release latches on each side of the tray; then, pull the tray

out the rest of the way.

8. Lift the air baffle out of the microprocessor tray.

9. Remove the microprocessor baffle from a microprocessor socket and store it

for future use. If you remove a microprocessor you must install a

microprocessor baffle to prevent the server from overheating.

Heat sink

Microprocessor

retention clip

baffle

10. Open the heat-sink retention clip:

a. Press down on one side of the heat-sink retention clip to release it from the

side of the socket; then, repeat the process on the opposite side.

b. Rotate the heat-sink retention clip forward to its fully open position.

Air baffle

Heat sink

Microprocessor

baffle

VRM 4

Chapter 2. Installing options

Table of Contents

System x3800 type 8866