Table of Contents
Advertisement
4 Replacement Procedures
4.4
HDD
Removing the HDD
The following describes the procedure for removing the HDD (See Figure 4-6 to 4-9).
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause
1. Turn the computer upside down.
2. Remove the following screw securing the HDD-1 slot cover.
3. Insert your finger into the slit and remove the HDD-1 slot cover.
4. Remove the HDD-1 assembly from the connector of the HDD-1 cable.
4-14
Downloaded from LpManual.com Manuals
data loss or damage to the device.
• M2.5×6B
FLAT HEAD screw
M2.5x6B FLAT HEAD
Figure 4-6 Removing the HDD-1 assembly
[CONFIDENTIAL]
×1
HDD-1slot cover
HDD-1assembly
Slit
HDD-1 cable
QOSMIO G40 Maintenance Manual (960-632)
4.4 HDD
Advertisement
Chapters
Table of Contents
Troubleshooting
