Intended use 3. Personal safety a. Stay alert, watch what you are doing and use common Your Black & Decker saw has been designed for sawing wood sense when operating a power tool. Do not use a power and wood products. This tool is intended for consumer use only. tool while you are tired or under the influence of drugs, Safety instructions alcohol or medication.
Page 6
f. Keep cutting tools sharp and clean. Properly maintained Further safety instructions for all saws cutting tools with sharp cutting edges are less likely to Causes and operator prevention of kickback: bind and are easier to control. kickback is a sudden reaction to a pinched, bound or g.
Safety instructions for circular saws with outer or inner - Risk of accidents caused by the uncovered parts of the pendulum guards and with tow guard rotating saw blade. a. Check lower guard for proper closing before each - Risk of injury when changing the blade. use.
Electrical safety Features 1. On/off switch This tool is double insulated; therefore no earth wire 2. Lock-off button is required. Always check that the power supply 3. Main handle corresponds to the voltage on the rating plate. 4. Secondary handle 5.
Page 9
Switching on and off The height difference between the toothed rim and the lower end of the riving knife should be 2 - 3 mm. To switch the tool on, move the lock-off button (2) into the Tighten the screws. unlock position and squeeze the on/off switch (1).
Technical data Or run the battery down completely if it is integral and then KS1400L TYPE1 KS1401L TYPE1 switch off. Input voltage Unplug the charger before cleaning it. Your charger does...
Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised KS1400L/KS1401L/KS1500L/KS1501L/KS1600L Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: Black &...
Page 15
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Page 16
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...