Table of Contents
Advertisement
OBJ_BUCH-1142-001.book Page 14 Monday, January 25, 2010 8:52 AM
14 | English
Technical Data
Chop and Mitre Saw
Article number
Rated power input
Rated voltage
Frequency
No-load speed
min
Cutting capacity,
max.
Laser type
Laser class
Weight according to
EPTA-Procedure
01/2003
Protection class
Permissible workpiece dimensions (maximal/minimal)
see page 18.
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Dimension of suitable saw blades
Saw blade diameter
Blade thickness
Mounting hole diameter
1 609 929 W25 | (25.1.10)
Assembly
PCM 1800
3 603 L01 040
W
1800
V
240
Delivery Scope
Hz
50
Before starting the operation of the machine for
-1
4500
the first time, check if all parts listed below have
been supplied:
mm
70
– Chop and mitre saw with mounted saw blade
– Dust bag 24
650 nm, < 1 mW
– Locking knob 12
2
– Extension bar 7 (2x)
– Material clamp 6
– Ring spanner 17
kg
13.8
Note: Check the power tool for possible dam-
/II
age.
Before further use of the machine, check that all
protective devices are fully functional. Any light-
ly damaged parts must be carefully checked to
ensure flawless operation of the tool. All parts
must be properly mounted and all conditions
fulfilled that ensure faultless operation.
Damaged protective devices and parts must be
immediately replaced by an authorised service
centre.
Additionally required tools (not in delivery
mm
254
scope):
mm
1.5–2.8
– Phillips screwdriver
mm
25.4
– Angle gauge
– Open-end spanner (13 mm)
– Allen key (6 mm)
Avoid unintentional starting of the ma-
chine. During assembly and for all work on
the machine, the power plug must not be
connected to the mains supply.
Bosch Power Tools
Hide quick links:
Advertisement
Table of Contents
