Page 1
Thank you for purchasing the Mobile WiFi. This Mobile WiFi brings you a high speed wireless network connection. This document will help you understand your Mobile WiFi so you can start using it right away. Please read this document carefully before using your Mobile WiFi. For detailed information about the functions and configurations of the Mobile WiFi, refer to the online help on the web management page that comes with the Mobile WiFi.
Getting to Know Your Mobile WiFi Note: The Mobile WiFi function descriptions and illustrations in this document are for your reference only. The product you have purchased may vary. Application Scenarios Wi-Fi devices (such as smartphones, tablet computers, and game consoles) or computers can all access the Internet through the Mobile WiFi.
Page 3
Scenario 1: Connecting multiple devices Scenario 2: Connecting a single device through through Wi-Fi...
Page 4
Scenario 3: Connecting multiple devices through Wi-Fi and USB simultaneously...
Page 5
Appearance Lanyard hole Signal indicator 2 3 4 5 Wi-Fi indicator Battery indicator Messages indicator Power button External antenna port (TS-9) Micro USB port...
Page 6
Indicators Indicator Status Description Green Strong signal Signal Orange Weak signal No signal Green Wi-Fi turned on Wi-Fi Green Sufficient battery Battery Blinking green Charging the battery Low battery Green New message Messages Blinking green Inbox full...
Page 7
SSID and Wireless Network Encryption Key When a Wi-Fi device establishes a connection to the Mobile WiFi for the first time, you may need to enter the default Service Set Identifier (SSID) and wireless network encryption key. These are printed on the Mobile WiFi label.
Getting Started Installing a SIM Card Caution: Use a standard SIM card compatible with the Mobile WiFi, otherwise you will damage your Mobile WiFi. Install the SIM card according to the illustration.
Charging the Battery If the Mobile WiFi has not been used for a long time or if the battery is fully depleted, the Mobile WiFi may not power on immediately after the charger is plugged in. Please charge the battery for a while before attempting to power on the Mobile WiFi. Method 1: Use the power adapter to charge the device Note: Only use power adapters compatible...
Page 11
The Mobile WiFi’s power adapter model is HW-050100X1W. X represents U, E, B, A, or J, depending on your region. For details about the specific adapter model, contact an authorized dealer. Method 2: Charge the device through a computer connection Use the data cable provided with your device to connect the Mobile WiFi to the computer.
Connecting to the Internet via Wi-Fi The Mobile WiFi's management parameters have been preset according to your operator's requirements. You can quickly connect to the Internet by following these steps: Step 1: Turn on the Mobile WiFi Press and hold the button until the indicator lights up, indicating that the Mobile WiFi is turned on.
Page 13
Select Start > Control Panel > Network Connections > Wireless Network Connection. Note: Before establishing a Wi-Fi connection, ensure that the computer is equipped with a wireless network adapter. If the computer indicates a wireless network connection, the wireless network adapter can be used. Otherwise, verify that your wireless network adapter is working properly.
Step 3: Connect to the Internet After successfully establishing a Wi-Fi connection, you can connect to the Internet using the following methods. Note: Select an appropriate Internet connection mode according to your billing method. For instance, if your network service calculates your bill by network connection time, it is recommended that you select manual connection mode.
Note: You can log in to the web management page and select an Internet connection mode. You can enable or disable the automatic dialing while roaming function. If this function is turned off, when the Mobile WiFi enters a roaming network, it will automatically disconnect from the Internet connection that has already been established.
Page 16
Daily Use Battery Saving Mode If the Mobile WiFi has been inactive for some time, the Mobile WiFi enters the standby mode, in which the battery indicator ( ) blinks slowly and the other indicators are off. Pressing the power button causes the indicator to light up. When the Mobile WiFi is being powered only by the battery, you can choose to enable or disable the automatic Wi-Fi turnoff function.
Restoring to Factory Settings If you forget some configuration parameters, you can restore the Mobile WiFi to its factory settings and then configure the Mobile WiFi again. Press and hold the RESET button until the indicators turn off. The Mobile WiFi is then restored to its factory settings.
Example 1: Connecting to a Game Console (for example, PSP) through Wi-Fi On the PSP, turn on the WLAN. Choose Settings > Network Settings. Select Infrastructure Mode. Select New Connection, and enter the connection name. Select Scan to search for wireless networks.
Page 19
Select Test Connection to test whether the network connection is successful. You can now open the browser and access the network.
Example 2: Connecting to a Tablet Computer (for example, iPad) through Wi-Fi Touch Settings > WLAN to turn on WLAN. The tablet computer automatically searches for wireless connections and displays a list of access points. Select the access point with the Mobile WiFi's SSID.
Page 21
Tips When the Mobile WiFi is in use for an extended period of time, it will become warm and may overheat. Should this happen, the Mobile WiFi will automatically close the network connection and turn off to protect itself from damage. If this occurs, place the Mobile WiFi in a well ventilated space to allow the heat to dissipate, then turn it on and continue to use it as normal.