Related Manuals for Siemens WM..U...
Summary of Contents for Siemens WM..U...
- Page 1 Washing machine WM..U... siemens-home.com/welcome Register your product online ens-home.com/welcome...
-
Page 2: Your New Washing Machine
Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries. -
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use The drain hose at the siphon is Intended use blocked ..... . 28 Filter in the water supply is For private domestic use only. -
Page 5: Safety Instructions
Safety instructions If you lean/sit on the opened Safety instructions ■ appliance door, the appliance may tip over and Electrical safety cause injuries. S a f e t y i n s t r u c t i o n s Do not lean on the appliance Warning door when it is open. - Page 6 Safety instructions Children may lock Warning ■ themselves in appliances, Risk of poisoning! putting their lives at risk. Detergents and care products When appliances have may be poisonous if reached the end of their consumed. service life: Keep detergents and care –...
-
Page 7: Environmental Protection
Environmental protection Tips on economical use Environmental protection Always fill the appliance with the ■ maximum amount of laundry for each programme. Packaging/used appliance Overview of programmes ~: E n v i r o n m e n t a l p r o t e c t i o n Supplementary sheet for the Dispose of packaging in an operating and installation... -
Page 8: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance Appliance G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Operating/Touch-Display Loading door Service flap... -
Page 9: Control Panel
Getting to know the appliance Control panel You only need to touch the display lightly to operate the appliance. Note: ( Programmes that can be selected Overview of programmes ~: Supplementary sheet for the operating and installation instructions. 0 Touch-Display 8 Start/Pause button Touch I button to start, interrupt (e.g. -
Page 10: Touch-Display
Getting to know the appliance Touch-Display Programme additional settings Programme default settings Display Setting ß i-Dos Dosage quantity for detergent Display Setting Description M i-Dos Dosage quantity for fabric softener Ž - 90°C Temperature Temperature that Soaking õ can be set in °C Rinse plus Ž... -
Page 11: Laundry
Laundry Laundry can discolour or not Note: Laundry be cleaned correctly. Wash white and coloured laundry separately. P reparing the laundry Wash new bright fabrics separately L a u n d r y the first time you wash them. Soiling Caution! ■... -
Page 12: Dyeing/Bleaching
Detergent Dyeing/bleaching Saving energy and detergent Dye should only be used in normal For light and normal soiling, you can household quantities. Salt may damage save energy (lower washing stainless steel. Always follow the dye temperature) and detergent. manufacturer's instructions. Saving Soiling/note Do not use the appliance to bleach... -
Page 13: Programme Default Settings
Programme default settings Finish in Programme default settings After selecting a programme, the programme duration is displayed, e.g. You can change the default settings for P r o g r a m m e d e f a u l t s e t t i n g s selected programmes. -
Page 14: I-Dos Setting
Programme additional settings After the programme starts, and while M i-Dos for fabric softener the selected time is counting down, you Adjustment values for dosage can change this as follows: quantities Touch the I button. Light: Touch + or - button to change the For slightly soft laundry number of hours. -
Page 15: Eco
Programme additional settings ( Speed Water plus Washing in a shorter time while Increased water level, gentler treatment achieving a washing result that is of the laundry. consistent with, but uses more energy than the selected programme without Easy iron the ( Speed setting. -
Page 16: Memory Programme
Operating the appliance Memory programme Operating the (â) appliance You can save a selected programme Preparing the appliance with your favourite settings here. O p e r a t i n g t h e a p p l i a n c e The appliance was tested before To store: delivery. -
Page 17: Switching On The Appliance/ Selecting A Programme
Operating the appliance Switching on the appliance/ Selecting the programme selecting a programme additional settings Press the # button. The appliance is By selecting additional settings, you can switched on. better adapt the washing process to your items of laundry. The Î... -
Page 18: Measuring And Adding Detergent And Care Products
Operating the appliance Unfold presorted laundry items and Note: Foam detection place them in the drum. If the f symbol also lights up on the Make sure that no items of laundry Touch-Display, the appliance has are trapped between the door and detected too much foam during the the rubber seal, and close the door. -
Page 19: Adding/Removing Laundry
Operating the appliance Cancel the programme Notes To remove the laundry at the end of ■ the programme,deactivate the For programmes at high temperatures: childlock. Touch the I button. The childlock remains active, even To cool down laundry: Select ■ once the appliance has been q Rinse/Spin 0. -
Page 20: Removing Laundry/Switching Off The Appliance
Intelligent dosing system Removing laundry/switching Intelligent dosing off the appliance system Press the # button. The appliance is Intelligent dosing system in switched off. I n t e l l i g e n t d o s i n g s y s t e m Open the door and remove the the detergent drawer laundry. -
Page 21: Everyday Use
Intelligent dosing system Everyday use Notes Only use easy-pour liquid products ■ that the manufacturer recommends Displays: adding to the detergent drawer. Do not mix different liquid ■ detergents. If changing your liquid detergent (type, manufacturer, etc.), empty the dispenser completely and clean it. -
Page 22: Basic Settings
Intelligent dosing system Below is an example of detergent Topping up the detergent/ fabric dosages on a packaging label: softener: If the display for the selected intelligent Degree of dosing flashes, this means that the soiling → amount of detergent or fabric softener in Water hard- the dispenser is below the minimum fill ness ↓... -
Page 23: Manual Dosage
Intelligent dosing system Changing the basic dosages: Caution! Damage to the appliance Touch and hold the corresponding Cleaning agents and agents for i-Dos button (ß or M) for approx. 3 pretreating laundry (e.g. stain removers, seconds. The preset basic dosage prewash sprays, etc.) may cause will appear in the Touch-Display. -
Page 24: Appliance Settings
Appliance settings Possible setting values: Appliance settings quiet Automatic switch-off medium A p p l i a n c e s e t t i n g s loud If the appliance is not operated for a very loud prolonged period (approx. 15 minutes), it may automatically switch off before the programme starts and when the Button signal... -
Page 25: Sensors
Sensors Switching the drum-care information Cleaning and signal on/off maintenance You can touch position 4 and use the + button to switch the ä Drum Clean Warning information signal on or off. C l e a n i n g a n d m a i n t e n a n c e Risk of death! There is a risk of electric shock if touch live components. -
Page 26: Descaling
Cleaning and maintenance Descaling Descaling should not be necessary if the detergent is measured out correctly. However, if it is required, follow the manufacturer's instructions for the descaling agent. Suitable descalers can be obtained via our website or from d) Then push the sealing plugs customer services. -
Page 27: Drain Pump Is Blocked
Cleaning and maintenance – Do not clean the cover in the Drain pump is blocked dishwasher and do not immerse it in water. Turn the tap off to prevent more Note: water from flowing in and to ensure that it is drained via the pump. Warning Risk of scalding! When you wash at high temperatures,... -
Page 28: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Filter in the water supply is blocked Release water pressure in the supply hose: a) Turn off the tap. b) Select any programme (except q Rinse/Spin 0). Put the service flap back on, lock it c) Touch the I button. Allow the into place and close it. -
Page 29: Faults And What To Do About
Faults and what to do about them Do not reach into the drum when it is Faults and what to do turning. about them Caution! Water damage! Emergency release Any escaping water may cause water F a u l t s a n d w h a t t o d o a b o u t t h e m E.g. -
Page 30: Faults And What To Do About Them
Faults and what to do about them Display Cause/Remedy E:602b E:60 alternating display with -2b and End when programme is finished: unbalance problem, spinning phase is aborted. The childproof lock is activated – deactivate it f lights up Too much foam has been detected and an additional rinse cycle has been activated. Reduce the basic dosage of ß... - Page 31 Faults and what to do about them Faults Cause/Remedy The programme will not Have you touched I button or selected f (Finish in) time? ■ start. Is the door closed? ■ Ó lights up: the detergent drawer has not been pushed in completely. Push ■...
-
Page 32: After-Sales Service
After-sales service Faults Cause/Remedy Loud noises, vibrations Is the appliance aligned? Align the appliance ~ Page 37 ■ and appliance "move- Are the appliance's feet fixed? Secure the appliance's feet ~ Page 37 ■ ment" during the spin Have the transport braces been removed? Remove the transport braces ■... -
Page 33: Technical Data
Technical data Technical data Dimensions: T e c h n i c a l d a t a 84.5 x 59.8 x 62 cm (height x width x depth) Weight: 78 kg Mains connection: Nominal voltage 220–240 V, 50 Hz Nominal current 10 A Nominal power 2300 W Water pressure:... -
Page 34: Safety Instructions
Positioning and connecting Installation surface Useful tool Spirit level for aligning ■ The appliance must be stable Note: Wrench with: ■ aligned so that it does not move – WAF13 for loosening the around. transport braces and The installation surface must be firm –... -
Page 35: Removing The Transport Locks
Positioning and connecting Unscrew and remove all four Notes transport brace screws. Recess width of 60 cm required. ■ Remove the sleeves. To do this, Only install the appliance ■ remove the mains cable from the underneath a continuous worktop holders. -
Page 36: Water Inlet
Positioning and connecting The following are available from Tip: Connection specialist dealers/the after-sales Connect the water supply hose to the service: water tap (¾" = 26.4 mm) and to the An extension for Aqua-Stop or cold ■ appliance: water supply hose (approx. 2.50 m); –... -
Page 37: Alignment
Positioning and connecting Caution! Drainage into a plastic pipe with ■ Water damage rubber bushing or into a drainage If the drain hose slips out of the washbasin or the connection point during draining due to high water pressure, any escaping water may cause water damage. -
Page 38: Electrical Connection
Positioning and connecting Electrical connection Before washing for the first time Warning The appliance was thoroughly tested Risk of death! before leaving the factory. To remove There is a risk of electric shock if you any water that may be left over from the touch live components. -
Page 39: Transportation
Aqua-Stop warranty Transportation Pour approx. 1 litre of water into left- ■ hand compartment, select the e.g. when moving home q Rinse/Spin 0 programme or and start. Preparatory work: This will prevent detergent from Turn off the water tap. flowing straight into the drain during Reduce the water pressure in the the next wash. - Page 40 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com *9001075507* 9001075507 (9511)