Viewing Etherlike Statistics - Cisco 500 series Administration Manual
Stackable managed switch
Hide thumbs
Also See for 500 series:
- Configuration manual (1140 pages) ,
- Administration manual (653 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
Viewing Statistics
Viewing Etherlike Statistics
Viewing Etherlike Statistics
Cisco 500 Series Stackable Managed Switch Administration Guide
-
15 Sec—Statistics are refreshed every 15 seconds.
-
30 Sec—Statistics are refreshed every 30 seconds.
-
60 Sec—Statistics are refreshed every 60 seconds.
The Receive Statistics area displays information about incoming packets.
•
Total Bytes (Octets)—Octets received, including bad packets and FCS
octets, but excluding framing bits.
•
Unicast Packets—Good Unicast packets received.
•
Multicast Packets—Good Multicast packets received.
•
Broadcast Packets—Good Broadcast packets received.
•
Packets with Errors—Packets with errors received.
The Transmit Statistics area displays information about outgoing packets.
•
Total Bytes (Octets)—Octets transmitted, including bad packets and FCS
octets, but excluding framing bits.
•
Unicast Packets—Good Unicast packets transmitted.
•
Multicast Packets—Good Multicast packets transmitted.
•
Broadcast Packets—Good Broadcast packets transmitted.
To clear statistics counters:
•
Click Clear Interface Counters to clear counters for the interface displayed.
•
Click Clear All Interface Counters to clear counters for all interfaces.
The Etherlike page displays statistics per port according to the Etherlike MIB
standard definition. The refresh rate of the information can be selected. This page
provides more detailed information regarding errors in the physical layer (Layer 1),
which might disrupt traffic.
To view Etherlike Statistics and/or set the refresh rate:
2
22
Hide quick links:
Advertisement
Table of Contents
