Sd Led-Sd Card Status; Related Commands; Show Led - Cisco 1120 Hardware Installation
Connected grid router
Hide thumbs
Also See for 1120:
- Installation manual (164 pages) ,
- Quick start manual (10 pages) ,
- Manual (6 pages)
Table of Contents
Advertisement
Figure 2
SD Card LED (Item 1)
SD LED—SD Card Status
Table 11
SD LED
Label
Color and State
SD0
Green
Green blinking
Amber solid
Amber blinking
Related Commands
show led, page 90
show led
To view the status of the router SYS LED, use the show led command in privileged EXEC mode. The SYS LED is located
on the router exterior (see
During normal operation, the router can be installed in a substation, utility box, or other hard-to-access location, and you
might not be able to view SYS LED. In this case, you can view the status of the LED from a remote location using the
show LED command.
The values displayed in the System LED field are described in
Description
SD flash card installed and operating normally
Note:
If the SD Card is removed, the SD flash memory module LED remains green solid
until the router is rebooted.
SD flash card data transfer in process
Error when system accesses the SD flash card
Router cannot locate a system software image
Unsupported SD card installed in the slot
Figure 1 on page
86),
1
SYS LED—System Status, page
90
86.
Advertisement
Chapters
Table of Contents
