Ethernet Ports - Cisco 1120 Hardware Installation
Connected grid router
Hide thumbs
Also See for 1120:
- Installation manual (164 pages) ,
- Quick start manual (10 pages) ,
- Manual (6 pages)
Table of Contents
Advertisement
Router Hardware Description
Hardware Features
Specifications
Specification
Connector type
Copper Interface
Fiber
Pinouts
Ethernet Ports
See
Figure 5 on page 22
Ethernet Connections
The router supports the following Ethernet connection types:
1000BASE-T—1000 Mbps full-duplex transmission over a Category 5 or higher shielded twisted-pair (UTP) cable.
Supports the Ethernet maximum length of 328 feet (100 meters).
100BASE-T—100 Mbps full-duplex transmission over a Category 5 or higher shielded twisted-pair (UTP) cable.
Supports the Ethernet maximum length of 328 feet (100 meters).
10BASE-T—10 Mbps full-duplex transmission over a Category 5 or higher shielded twisted-pair (UTP) cable.
Supports the Ethernet maximum length of 328 feet (100 meters).
Fast Ethernet (FE) Ports
The router features six Fast Ethernet (FE) ports that can be connected to local network devices, such as IEDs, sensors,
and reclosers. The ports are labeled as follows:
ETH 2/3
ETH 2/4
ETH 2/5
ETH 2/6
ETH 2/7
ETH 2/8
Description
RJ-45
Full-duplex 10BASE-T, 100BASE-TX, 1000BASE-T
SFP modules:
1000 Mbps 8B/10B coding
100 Mbps 4B/5B coding.
See
Connector and Cable Specifications, page
for Ethernet port locations
95.
25
Advertisement
Chapters
Table of Contents
