Before You Begin; Verify Router Hardware Readiness; Tools And Materials You Supply - Cisco 1120 Hardware Installation
Connected grid router
Hide thumbs
Also See for 1120:
- Installation manual (164 pages) ,
- Quick start manual (10 pages) ,
- Manual (6 pages)
Table of Contents
Advertisement
Connecting the Router to Power
This section describes how to connect the Cisco 1120 Connected Grid Router to AC and DC power source
These topics are discussed:
Before You Begin, page 45
AC Power Connection Information, page 47
Connect to AC Power, page 51
Connect to DC Power (Optional), page 52
Power Cycling the Router, page 53
Before You Begin
Before you connect power to the router, read these topics:
Verify Router Hardware Readiness, page 45
Tools and Materials You Supply, page 45
Safety Information, page 47
Verify Router Hardware Readiness
Before connecting the router to power, verify the following:
The unit is grounded as described in
The SD flash memory module is installed correctly as described in
Tools and Materials You Supply
You must provide the following tools and materials to connect the router to AC power or optional DC power:
Note:
For the AC power connector, a 5-way screw terminal printed circuit board plug connector manufactured by
Phoenix Contact (part number 1913604) is supplied.
Note:
For the DC power connector, a 2-way screw terminal printed circuit board plug connector manufactured by
Phoenix Contact (part number 1912184) is supplied.
Wire-stripping tool
Flat-blade screwdriver
Mounting the Router, page
Cisco Systems, Inc.
www.cisco.com
45
35.
Using the SD Flash Memory Module, page
79.
Advertisement
Chapters
Table of Contents
