Front Panel Leds; Wifi Antenna Port; Usb Port - Cisco 1120 Hardware Installation
Connected grid router
Hide thumbs
Also See for 1120:
- Installation manual (164 pages) ,
- Quick start manual (10 pages) ,
- Manual (6 pages)
Table of Contents
Advertisement
Router Hardware Description
Hardware Features
Front Panel LEDs
For detailed descriptions of the LEDs that appear on the front panel, see
WiFi Antenna Port
A single WiFi antenna is installed directly in this port to support the router. For more information, see the
Short-Range Access Point, page
WiFi antenna port location.
Antennas
For more detailed information about supported antennas, including specifications and installation instructions, see these
documents:
About Connected Grid Antennas, page 73
Connected Grid Antennas Installation Guide
Specifications
Specification
Connector type
Supported antenna
USB Port
See
on page 17
for the USB port location.
The router features one standard USB 2.0 port for connecting and powering an optional USB peripheral device.
The USB port operates at the following speeds:
1 Mbps
12 Mbps
480 Mbps
USB Connections
Depending on the USB devices you connect to this port, you might require a USB extension cable to connect devices.
To prevent a connected USB device accidental or unauthorized removal from the port, secure any connected USB
device with a locking mechanism designed for this purpose. You must provide any locking device or mechanism.
32. You must order this antenna separately from the router.
on Cisco.com
Description
Female QMA
Cisco Product ID (PID): ANT-4G-DP-IN-TNC
Form factor: Swivel-mount indoor dipole
Bands supported: Cellular/PCS/AWS/MDS, WiMAX 2100/2300/2500/2600 and global
GSM900/GSM1800/UMTS/LTE2600
Router LED Locations and States, page
19
85.
WiFi
on page 17
displays the
Advertisement
Chapters
Table of Contents
