Vlan-Related Cli Commands - Cisco ASR 5500 System Administration Manual
Hide thumbs
Also See for ASR 5500:
- Administration manual (410 pages) ,
- Installation manual (192 pages) ,
- Installation procedure overview (6 pages)
Table of Contents
Advertisement
VLANs
• Repeat this command for each subscriber.
• Save your configuration as described in the Verifying and Saving Your Configuration chapter.
VLAN-Related CLI Commands
VLAN-related features and functions are supported across several CLI command modes. The following tables
identify commands associated with configuration and monitoring of VLAN-related functions.
For detailed information regarding the use of the commands listed below, see the Command Line Interface
Reference.
Table 15: VLAN-Related Configuration Commands
CLI Mode
AAA Server Group Configuration Mode
ACS Charging Action Configuration Mode
Context Configuration Mode
Context Configuration Mode
Context Configuration Mode
Ethernet Interface Configuration Mode
Command
radius attribute nas-ip-address address
ip_address nexthop-forwarding-address
ip_address vlan vlan_id
ip vlan vlan_id
ip pool pool_name nexthop forwarding
address ip_address overlap vlanid
vlan_id
ip routing overlap-pool
radius attribute nas-ip-address address
ip_address nexthop-forwarding-address
ip_address vlan vlan_id
[no] logical-port-statistics
ASR 5500 System Administration Guide, StarOS Release 21.5
VLAN-Related CLI Commands
Description
Sets the RADIUS client to provide the
VLAN ID with the nexthop forwarding
address to a system when running in single
nexthop gateway mode.
Note: To access the vlan keyword,
aaa-large configuration must be enabled
via the Global Configuration mode.
Configures the VLAN identifier to be
associated with the subscriber traffic in the
destination context.
When a nexthop forwarding address is
configured, the overlap vlanid keyword
enables support for overlapping IP address
pools and associates the pool with the
specified VLAN ID.
Advertises overlap-pool addresses in
dynamic routing protocols when overlap
pools are configured using VLAN IDs.
When enabled, the overlap addresses are
added as interface addresses and advertised.
Specifies the VLAN ID to be associated
with the next-hop IP address.
Enables or disables the collection of logical
port (VLAN and NPU) bulk statistics for
the first 32 configured Ethernet or PVC
interface types.
239
Advertisement
Table of Contents
Troubleshooting
