Management Settings
Notes:
• If you are using the Secure Sockets Layer (SSL) option, do not enable the IIOP transport parameter.
• You configure the ORBEM interface to use SSL by specifying a certificate and private key.
Verifying ORBEM Parameters
Step 1
Run the show orbem client table command to verify that the client was configured properly. This command lists the
configured ORBEM clients and displays their state and privileges.
Step 2
Run the show orbem status command to verify the ORBEM parameter configuration. The following displays a sample
of this command's output.
Service State
Management Functions
IOP Address
SSL Port
TCP Port
Notification SSL Port
Notification TCP Port
Session Timeout
Max Login Attempts
IIOP Transport
Notification
Debug Level
IDL Version Check
Number of Current Sessions
Number of Event Channels Open
Number of Operations Completed
Number of Events Processed
Avg Operation Processing time
SNMP MIB Browser
This section provides instructions to access the latest Cisco Starent MIB files using a MIB Browser. An
updated MIB file accompanies every StarOS release. For assistance to set up an account and access files,
please contact your Cisco sales or service representative for additional information.
A MIB Browser allows the user to pull out data from SNMP enabled devices. You can load standard and
propriety MIBs. The tool allows the user to see the MIB data in a readable format and also offers the ability
to search for a specific OID. The Browser displays all of the MIBs in a MIB tree which makes it easy to find
and identify all Objects, Traps or Conformances.
event-notif-iiop-port iiop_notif_port
end
: On
: FCAPS
: 192.168.1.150
: 14131
: 14132
: 7777
: 7778
: 86400 secs
: 5
: On
: On
: Off
: On
: 1
: 0
: 2895
: 0
: 87214 usecs
(last 1000)
: 87950 usecs
ASR 5500 System Administration Guide, StarOS Release 21.5
Verifying ORBEM Parameters
59