Measuring Workpieces At The Milling Machines - Siemens SINUMERIK 828D Commissioning Manual
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Operating manual (926 pages) ,
- Programming manual (822 pages)
Table of Contents
Advertisement
Configuring cycles
7.9 Measuring cycles and measurement functions
MD20310 $MC_TOOL_MANAGEMENT_MASK
= 4002H
Bit 1 = 1
Bit 14 = 1
MD28082 $MC_SYSTEM_FRAME_MASK
1
The following channel-specific machine data acts only if the system frame actual value setting
and scratching is set-up using the above mentioned machine data
MD28082 $MC_SYSTEM_FRAME_MASK, bit 0 = 1.
MD24006 $MC_CHSFRAME_RESET_MASK
Bit 0 = 1
MD24007 $MC_CHSFRAME_RESET_CLEAR_MASK
Bit 0 = 0
Note
If you create the conditions described in this section and you have set and checked the machine
setting data, then in JOG mode, you can measure a workpiece using a workpiece probe at a
milling machine!
In JOG mode, you can measure a tool using a tool probe at a milling machine or lathe!
A description is provided in the following chapters as to which settings you can make in order
to adapt measuring to the specific requirements of your particular machine.
7.9.3.1
Measuring workpieces at the milling machines
Measuring in the "Machine" operating area can be appropriately adapted to the specific
requirements using the following channel-specific general machine data and channel-specific
cycle setting data.
General configuration machine data
SD55630 $SCS_MEA_FEED_MEASURE
300
178
Minimum value
Tool manager and monitoring functions active
Automatic tool change for RESET and Start.
Default, cannot be changed
Reset response of the system frames or actual value setting.
Clear response of the system frames on reset.
Default value
Activates tool manager functions
System frames (SRAM).
Active system frames after reset.
Clear system frames on reset.
Measuring feedrate for workpiece meas‐
urement in AUTOMATIC and JOG
Commissioning Manual, 10/2015, 6FC5397-3DP40-5BA3
SINUMERIK Operate
- Quick Links:
- Cnc Commissioning
Hide quick links:
Advertisement
Chapters
Table of Contents
