Table of Contents
Advertisement
Decoding Bar Codes
Once the ring scanner is connected, you must run a scanning application, such as Scan Demo (see below), before your scanner
will be able to scan. The lighting and aimer will not turn on when you press the trigger until a scanning application is running on
the terminal.
Aiming Beam
When scanning bar codes, place the aimer over the bar code to be read.
Warning: Do not stare directly in to the laser beam
Linear Bar Code.
2D Matrix Symbol
Using Scan Demo to Decode a Bar Code
Note: The ring scanner will not scan (no lighting or aimer on when trigger is pressed) until a scanning application is running on
the terminal, such as Scan Demo, described below.
Scan Demo is a scanning application available on the Dolphin 75e Windows model to decode bar codes with the ring scanner.
When you start the Scan Demo app, it automatically detects and connects to the ring scanner.
Note: Scan Demo demonstrates the functionality of the ring scanner and is not intended as a functional business solution.
1. On the All Apps list select Scan Demo
2. Scan Demo notifies the user that multiple scanners have been detected and tells you which scanner is the current scanner.
Touch OK. If the ring scanner (8620XXX) is not the current scanner, select it in Settings, Scanners.
3. Point the ring scanner at the bar code. For optimum performance, avoid reflections by scanning the bar code at a slight
angle. Press the ring scanner trigger and place the aimer over the bar code (see
4. The bar code is decoded (ring scanner beeps and green LED flashes one time) and the results appear on the screen.
4 - 2
.
Aiming Beam
on page 4-2).
Advertisement
Table of Contents
