Advertisement
Speed Control Adjustment
1. Set the HOC lever to 2" (5cm), and then move the
speed control lever to the "FAST" position.
2. Loosen the cable clamp securing the speed control
cable jacket to the shifter bracket (Fig. 0777).
Fig. 0777
3. Loosen the screws that go through the center of the
LH and RH shoulder hubs (Fig. 0778).
Fig. 0778
Toro GrandStand Service Manual
4. Remove the hairpin cotter and washer from the LH
speed control linkage (Fig. 0779).
5. Insert a 7/32" (approx. 5.6mm) Allen wrench into the
slots of the control fork and control arm in front of the
DSC-0488a
LH speed control linkage rollers (Fig. 0780).
DSC-0514a
CONTROLS
Fig. 0779
DSC-0513a
Fig. 0780
DSC-0504a
4
4-39
Advertisement
