Advertisement
CHASSIS
5. Position the right hand lift plate over the grease
block with the bolt hole pattern aligned with the
mating pattern on the engine base (Fig. 0236).
3
6. 2009 only: Loosely install four carriage bolts,
Belleville washers, nuts (Fig. 0237).
3-64
Fig. 0236
DSCN-0758a
Fig. 0237
DSCN-0784a
7. 2009 only: Tighten the four sets of fasteners.
8. 2010 only: The right side lift plate is secured with
three long carriage bolts and one short (Fig. 0238).
Fig. 0238
9. 2010 only: Loosely install the short carriage bolt
and nut in the upper left bolt hole (Fig. 0239).
Fig. 0239
Toro GrandStand Service Manual
DSCN-0768a
DSCN-0770a
Advertisement
