Advertisement
10. 2010 only: Loosely install the remaining three
carriage bolts, Belleville washers, and nuts (Fig.
0240).
Fig. 0240
11. 2010 only: Tighten the four sets of fasteners.
12. Position the left hand lift plate over the grease block
with the bolt hole pattern aligned with the mating
pattern on the engine base (Fig. 0241).
Fig. 0241
Toro GrandStand Service Manual
13. Loosely install four carriage bolts, Belleville washers,
nuts (Fig. 0242).
DSCN-0772a
14. Tighten the four sets of fasteners.
15. 2009 only: Install the spacer into the rear cross
shaft hub (Fig. 0243).
DSCN-0780a
CHASSIS
Fig. 0242
DSCN-0784a
Fig. 0243
DSCN-1603a
3
3-65
Advertisement
