Advertisement
ELECTRICAL
Power Take Off (PTO) Switch Installation
1. Install the switch into the control panel. Ensure that
the mounting clips have secured the switch in the
control panel (Fig. 1459).
2. Install the wire harness to the back of the switch
(Fig. 1460).
8
8-14
Fig. 1459
IMG-1246a
Fig. 1460
IMG-1240a
Electric PTO Clutch Removal
1. Turn the engine off and remove the key from the
ignition.
2. Set the parking brake.
3. Lower the mower deck to the lowest height-of-cut
position.
4. Remove the LH and RH belt covers (Fig. 1461).
Fig. 1461
5. Loosen the front idler pulley by loosening the nut
(Fig. 1462).
Fig. 1462
Toro GrandStand Service Manual
IMG-9548a
IMG-9550a
Advertisement
