4-4.
DC Fan
4-4-1.
Fan Holder Assembly
Note
This section describes the procedure for the upper fan holder assembly (A). The same replacement procedure can be
used for other fan holder assemblies.
Procedure
1.
Remove the three screws, then remove the fan holder assembly (A) holding the handle.
Fan holder
assembly (A)
Fan holder
assembly (B)
Note
When attaching the fan holder assemblies, match the fan name on the label and the convex portions of CPU socket
with the imprinting mark of the main unit.
2.
Install the removed parts by reversing the steps of removal.
4-4-2.
DC Fan (Fan Holder assembly (A))
Preparation
1.
Remove the fan holder assembly. (Refer to
XVS-8000-C/XVS-8000
Fan holder assembly (A)
"4-4-1. Fan Holder
Assembly")
Label
Fan name
Imprinting
mark
PSW3x 6
Handle
4-4