Table of Contents
Advertisement
Available languages
Available languages
2
Remove the guide plate if the tap is too large
to fit the adapter.
Guide plate
3
Push the adapter onto the end of the tap
so that the rubber seal forms a watertight
connection. Tighten the four fixing screws
and the adapter ring plate.
4
Pull the connector latch plate down, push the
supply hose onto the adapter, and release
the connector latch plate. Make sure the
adapter locks into place.
NOTE
• After connecting the supply hose to the water
tap, turn on the water tap to flush out foreign
substances (dirt, sand, sawdust, and etc.)
in the water lines. Let the water drain into a
bucket, and check the water temperature.
Latch plate
Connecting Hose to Two Washing
Machines
1
Connect the water supply hose connector
to the water supply hose of the front-loading
washing machine. Open the accessory
package for pedestal washing machine
installation.
Water supply
hose connector
Press
board
2
Connect the water supply hose of pedestal
washing machine to the water supply hose
connector, pedestal washing machine to be
installed.
Rubber
packing
3
Connect the additionally provided water
supply hose of the front-loading washing
machine to the water supply hose connector
and water faucet.
Water supply hose connector
EN
Rubber
packing
15
Advertisement
Chapters
Table of Contents
Troubleshooting
