Cisco NCS 540 Hardware Installation Manual page 37

Large density routers

Hide thumbs Also See for NCS 540:

Table of Contents

Install the Device

Table 6: Cisco N540-24Q8L2DD-SYS Router Rack-Mount Kit

Quantity

1. Attach the rack-mount brackets and the cable guides to the router as follows:

a. The router has port-side intake modules, position the router so that its ports are facing the cold aisle.

b. Position the bracket ears facing front or middle rack-mount, on the side of the chassis so that the holes

c. Use four M4 screws to attach the brackets to the chassis.

d. Repeat Steps 1b and 1c with the other rack-mount bracket on the other side of the router.

Figure 10: Installing 19-inch Rack-Mount Brackets (N540DD-RKM-19)

Part Description

Rack-mount brackets

M4 x 0.7 x 7-mm Phillips flat-head screws

12-24 x 0.49 inches L, Philips pan head screws

are aligned.

Cisco Network Convergence System 540 Large Density Routers Hardware Installation Guide

Rack Mount

Table of Contents

Show Quick Links

Table of Contents

N540-24q8l2dd-sys