Cisco NCS 540 Hardware Installation Manual page 47

Large density routers

Hide thumbs Also See for NCS 540:

Table of Contents

Install the Device

Figure 22: Connecting the USB Console Cable to the Front of Chassis

Figure 23: Connecting RJ-45 Console Cable to the RJ-45 Console Port at Rear End of the Chassis

Follow this procedure to connect a data terminal to the console port:

1. Set your terminal to these operational values: 115200 bps, 8 data bits, no parity, and two stop bits.

2. Attach the terminal end of the cable to the interface port on the data terminal.

3. Attach the other end of the cable to the console port.

Table 7: RJ-45 Straight-through Cable Pin-outs

RJ-45 Pin

USB Type-A connector

RJ-45 console port

Cisco Network Convergence System 540 Large Density Routers Hardware Installation Guide

Connect to the Console Port

USB cable

RJ-45 console cable

Signal

—

Table of Contents

Show Quick Links

Table of Contents

N540-24q8l2dd-sys