Cisco Catalyst 9500 Manual page 248
Hide thumbs
Also See for Catalyst 9500:
- Manual (360 pages) ,
- Configuration manual (223 pages) ,
- Hardware installation manual (122 pages)
Table of Contents
Advertisement
Configuration Examples for Software Maintenance Upgrade
Command or Action
Step 7
install remove {file location filename | inactive}
Example:
Device# install remove file
flash:cat9k_iosxe.2017-01-10_13.15.1.
CSCxxxxxxx.SSA.dmp.bin
Step 8
show version
Example:
Device# show version
Step 9
show install summary
Example:
Device# show install summary
Configuration Examples for Software Maintenance Upgrade
Example: Managing an SMU
The following example shows how to copy an SMU file to TFTP:
Device# copy tftp://172.19.1.250//tftpboot/folder1/
cat9k_lite_iosxe.xx.xx.xx.CSCxxxxxxx.SSA.dmp.bin
tftp:Destination filename [cat9k_lite_iosxe.xx.xx.xx.CSCxxxxxxx.SSA.dmp.bin]?
Accessing tftp://172.19.1.250//auto/tftpboot/folder1/
cat9k_lite_iosxe.xx.xx.xx.CSCxxxxxxx.SSA.dmp.bin...
Loading /auto/tftpboot/folder1/cat9k_lite_iosxe.xx.xx.xx.CSCxxxxxxx.SSA.dmp.bin
from 172.19.1.250 (via GigabitEthernet0): !
[OK - 17668 bytes]
17668 bytes copied in 0.058 secs (304621 bytes/sec)
The following is sample output from the show install summary command:
Device# show install summary
[ Switch 1 ] Installed Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
SMU C flash:cat9k_lite_iosxe.xx.xx.xx.CSCxxxxxxx.SSA.dmp.bin
IMG C xx.x.x.0
The following example shows how to add a maintenance update package file:
Device# install add file flash:cat9k-
universalk9.2017-01-10_13.15.1.CSCxxxxxxx.SSA.dmp.bin
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
234
Purpose
Deletes all or the specified inactive SMU package from the
file system.
Displays the image version on the device.
Displays information about the active package.
• The output of this command varies according to the
install commands that are configured.
Software Maintenance Upgrade
Hide quick links:
Advertisement
Table of Contents
