Table of Contents
Advertisement
Operation Manual / Power2 850-M / 4 Product description
1 Introduction / 1.6 Locations of the rating plates
1.6
Locations of the rating plates
Low-pressure stage
Fig. 8: Location of Power2 LP rating plate
One rating plate each is attached on the left and the right side of the foot (bearing casing)
and to the filter silencer and air suction branch of the low-pressure stage.
High-pressure stage
Fig. 9: Location of Power2 HP rating plate
One rating plate each is attached on the left and the right side of the foot (bearing casing)
and to the air suction branch of the high-pressure stage.
© Copyright 2019 ABB. All rights reserved.
HZTL4061_EN
Rev.B
June 2019
Advertisement
Table of Contents
