Page 1
Washing machine WM16XMA9DN User manual and assembly instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
Table of contents Safety .......... 4 Laundry.......... 32 General information...... 4 Preparing the laundry ..... 32 Intended use........ 4 Sorting laundry ....... 33 Restriction on user group.... 5 Degrees of soiling ...... 33 Safe installation ........ 5 Care symbols on the care labels ... 33 Safe use ........... 7 Detergents and care products..
Page 3
Cleaning the drain pump.... 42 Cleaning the water outlet hose at the siphon........ 45 Cleaning the water inlet filter.. 46 Troubleshooting...... 47 Error code / Fault display / Sig- nal........... 47 Malfunctions ........ 48 Noise .......... 51 Problem with results....... 51 Leakage.......... 52 Odours.......... 53 Emergency release ...... 54 Transportation, storage and disposal .........
en Safety Safety Please read the safety information to ensure that you use the ap- pliance safely. General information You can find general information about this instruction manual here. ¡ Read this instruction manual carefully. Only this will ensure you use the appliance safely and efficiently. ¡...
Safety en Restriction on user group Avoid risks to children and vulnerable persons. This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers.
Page 6
en Safety ¡ If the insulation of the power cord is damaged, this is danger- ous. ▶ Never let the power cord come into contact with hot appli- ance parts or heat sources. ▶ Never let the power cord come into contact with sharp points or edges.
Safety en CAUTION ‒ Risk of injury! ¡ The appliance may vibrate or move when in use. ▶ Place the appliance on a clean, even, solid surface. ▶ Align the appliance using the appliance feet and a spirit level. ¡ If hoses and power cords have been laid incorrectly, this causes a tripping hazard.
Page 8
en Safety ▶ Never expose the appliance to intense heat or humidity. ▶ Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance. WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk.
Safety en ¡ The appliance may tip over if you sit on or lean against the open door. ▶ Do not sit on or lean against the appliance door. ▶ Do not place any objects on the appliance door. ¡ Reaching into the drum while it is still turning may cause hand injuries.
Page 10
en Safety ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be replaced by the manufacturer, the manufacturer's Customer Service or a similarly qualified person in order to prevent any risk.
Preventing material damage en Make sure that the valve hous- ▶ Preventing material damage Preventing material dam- ing for the water inlet hose does not come into contact with its surroundings and is not subjec- ted to any external forces. Follow these instructions to avoid ma- Preventing material damage Ensure that the inner diameter terial damage and damage to the ap-...
en Environmental protection and saving energy Do not use cleaning products Use the economy programme set- ▶ with a high alcohol content. tings. Do not use hard scouring pads ▶ If you adjust the programme set- or cleaning sponges. tings for a programme, the display Clean the appliance with nothing ▶...
Installation and connection en ATTENTION! Energy saving mode Objects remaining in the drum that If you do not use the appliance for an are not designed for operation with extended period, it automatically the appliance may cause material switches to energy-saving mode. All damage and damage to the appli- displays go out and flashes.
en Installation and connection Contents of package After unpacking all parts, check for any damage in transit and completeness of the delivery. Requirements for the installa- Washing machine tion location Accompanying documents The appliance may "wander" when it Elbow for fixing the water outlet hose spins.
Installation and connection en Installation location Requirements WARNING Risk of electric shock! On a wooden joist Place the appliance The appliance contains live parts. floor on a water-resistant Touching live parts is dangerous. wooden board which Do not operate the appliance ▶...
en Installation and connection Unscrew and remove all four Put on the four cover caps. screws for the transit bolts with a WAF 13 wrench. Press down on the four cover caps. Pull the power cord out of the holder. Removing the transport struts Remove the four sleeves.
Installation and connection en Unscrew and remove the screws in the vertical transport struts using a T20 screwdriver. Connecting the appliance Connect your appliance to the power Remove the transport struts. supply, water inlet and water outlet. Connecting the water inlet hose Note: Please read the information in the "Safety"...
en Installation and connection Drainage into a plastic pipe with rubber sleeve or into a gully. Fix and secure the wa- ter outlet hose with an elbow. Connecting the appliance to the electricity supply Note: Please read the information in the "Safety" → Page 4 and "Prevent- Open the water tap carefully and ing material damage"...
Page 19
Installation and connection en To align the appliance, turn the ap- pliance feet. Check that the appli- ance is level using a spirit level. All appliance feet must stand firmly on the ground. Screw the lock nuts tightly against the housing using a WAF 17 wrench.
en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarise yourself with the parts of your appliance. Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
Familiarising yourself with your appliance en Detergent drawer Measuring aid for liquid detergent → "Using a measuring aid for liquid Below is an overview of the structure detergent", Page 36 of the detergent drawer. Compartment II: ¡ Detergent for main wash ¡ Water softener ¡...
en Display Display Display The display shows the current settings, options or relevant information. Display Display Designation Description 0:40 Programme duration/ Approximate expected programme duration or pro- programme time re- gramme time remaining. maining "Ready in" time The programme end has been set and the remaining number of hours is displayed.
Page 23
Display en Display Designation Description Foam detection system The appliance has detected too much foam. → "Error code / Fault display / Signal", Page 47 Door The door is unlocked and can be opened. ¡ No water pressure. → "Error code / Fault display / Signal", Page 47 ¡...
en Buttons Buttons Buttons Below is an overview of the buttons and their setting options. Buttons The selection of programme settings depends on the selected programme. You can see the selection options for each programme in the overview for → "Programmes", Page 26. Button Selection Description...
Page 25
Buttons en Button Selection Description (Water & Rinse ¡ Activate Activate or deactivate wash with more water and Plus) an additional rinse cycle. ¡ Deactivate Recommended for particularly sensitive skin or in regions with very soft water. (Soaking) ¡ Activate Activate or deactivate soaking. Before the main wash cycle starts, the laundry re- ¡...
Accessories en Accessories Accessories Only use original accessories. These have been made especially for your appli- Accessories ance. Here you can find an overview of your appliance's accessories and how to use them. Order number Water inlet hose extension Extend the water inlet hose for WZ10131 cold water or AquaStop (approx.
en Laundry Pour washing powder into com- Laundry Laundry partment II. You can wash all items that the man- Laundry ufacturer has marked as machine- washable on the care label and fab- rics made from hand-washable wool using your appliance. Preparing the laundry ATTENTION! Objects remaining in the laundry may damage the laundry and the drum.
Laundry en – Type of fabric and fibre type Sorting laundry – Whites Note: Please read the information in – Colours the "Safety" → Page 4 and "Prevent- Wash new coloured items ing material damage" → Page 11 sec- separately the first time you tions to ensure that you use the appli- wash them.
en Detergents and care products Notes Detergents and care products Detergents and care ¡ Only use liquid detergents that are self-flowing products ¡ Do not mix different liquid deter- gents You can protect your appliance and Detergents and care products ¡ Do not mix detergent and fabric your laundry by selecting and using softener the correct detergents and care...
Basic operation en Detergent dosage Use the correct detergent dosage to ¡ Water hardness achieve optimal washing results and You can find out how hard your save resources. water is from your local water com- The detergent dosage depends on: pany or measure it yourself using ¡...
en Basic operation Requirement: Prepare and sort the Setting a programme laundry. Set the programme selector to the → "Laundry", Page 32 required "programme" → Page 26. Open the door. If necessary, "adjust the pro- Ensure that the drum is empty. gramme settings" → Page 36. Separate the laundry and place it in the drum.
Basic operation en Insert the measuring aid. Fold the measuring aid down and click it into place. Insert the detergent drawer. Push in the detergent drawer. Adding detergent and care product Notes ¡ Please read the information in the "Safety" → Page 4 and "Preventing material damage"...
en Basic operation Push in the detergent drawer. The appliance door remains locked for safety reasons if the temperature and water levels are Starting the programme high. Note: If you want to change the time – If the temperature is high, start until the programme ends, set the the Rinse programme.
Childproof lock en Deactivating the childproof lock Requirement: To deactivate the childproof lock, the appliance must be switched on. Press and hold the two 3 sec. ▶ buttons for approx. 3 seconds. So that the programme currently running is not cancelled, the pro- gramme selector must be set to Wipe the rubber gasket dry and re- the initial programme.
en Basic settings Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings Below is an overview of the basic settings on your appliance. Basic setting Programme position Value Description End signal 0 (off) Set the volume of the 1 (quiet)
Cleaning and servicing en Press and, at the same time, Cleaning the drum turn the programme selector to po- If you often wash at a washing tem- sition 2. perature of 40 °C and lower or the a The display shows the current appliance has not been used for a value.
en Cleaning and servicing Press out the insert upwards from below. Push in the detergent drawer. Descaling Clean the detergent drawer and in- sert with water and a brush, and If you add detergent correctly, you do then dry them. not need to descale your appliance. If you still wish to use descaler, follow the manufacturer's instructions for use.
Page 43
Cleaning and servicing en Remove the maintenance flap. CAUTION - Risk of scalding! When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
Page 44
en Cleaning and servicing The pump cap is comprised of two Cleaning the drain pump parts which can be taken apart for cleaning. Note: Please read the information in Make sure that the impeller in the the "Safety" → Page 4 and "Prevent- drain pump can be rotated. ing material damage"...
Cleaning and servicing en Insert the maintenance flap and lock it into place. Residual water may leak out. Clean the water outlet hose and si- phon connecting piece. Close the maintenance flap. Before the next wash To prevent unused detergent from flowing straight into the outlet in the next wash, run the Drain programme after you have emptied the drain...
en Cleaning and servicing Cleaning the water inlet filter Clean the filter in the water inlet in the event of blockages or if the water pressure is too low. Emptying the water inlet hose In order to clean the filter, first empty the water inlet hose.
Troubleshooting en Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
en Troubleshooting Fault Cause troubleshooting The filter in the water inflow "Clean the water inflow filter" ▶ → Page 46. is blocked. The tap is turned off. Turn on the tap. ▶ The water inlet hose is Ensure that the water inlet hose is ▶...
Page 49
Troubleshooting en Fault Cause troubleshooting The programme does not - + is activated. Check whether - + is activated. ▶ → "Buttons", Page 24 start. Laundry is caught in the Open the door again. door. Remove any trapped laundry. Close the door.
Page 50
en Troubleshooting Fault Cause troubleshooting The spin cycle runs several The unbalanced load detec- Not a fault – no action required. ▶ times. tion system eliminates an im- Note: When loading, where possible, balance by repeatedly redis- place large and small items of laundry tributing the laundry.
Troubleshooting en Fault Cause troubleshooting Heavy foam build-up Detergent dosage is too Immediate measure: Mix one table- ▶ high. spoon of fabric softener with 0.5 litres of water and pour the mixture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down).
en Troubleshooting Fault Cause troubleshooting Detergent or fabric softener Too much detergent/fabric When dosing liquid detergent and ▶ drips off the seal and col- softener in the detergent fabric softener, observe the mark- lects on the door or in the drawer. ing in the detergent drawer and do seal fold.
Troubleshooting en Odours Fault Cause troubleshooting → "Cleaning the drum", Page 41 Odours have formed in the Humidity and detergent ▶ appliance. residue may promote the If you are not using the appliance, ▶ formation of bacteria. leave the door and detergent drawer open so that residual water can evaporate.
en Transportation, storage and disposal Unplug the appliance's mains plug. Emergency release Drain the remaining detergent To remove the laundry in the event of solution. a power failure, for example, you can → "Cleaning the drain pump", manually release the door. Page 42 Detach the hoses.
Transportation, storage and disposal en Start the Drain programme. a The unused detergent cannot flow straight into the outlet during the next wash. Disposing of old appliance Valuable raw materials can be re- used by recycling. WARNING Risk of harm to health! Insert the power cord into the Children can lock themselves in the holder...
en Customer Service Detailed information on the warranty Customer Service Customer Service period and terms of warranty in your country is available from our after- If you have any queries on use, are Customer Service sales service, your retailer or on our unable to rectify faults on the appli- website.
Page 57
Customer Service en ¡ A claim can only be made under the guarantee if the appliance has been correctly installed and con- nected with Aqua-Stop according to our instructions; this also in- cludes correctly fitting the Aqua- Stop extension (genuine access- ory).
en Consumption values Consumption values Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456.
Page 59
Technical specifications en Water pressure ¡ Minimum: 100 kPa (1 bar) ¡ Maximum: 1000 kPa (10 bar) Length of the water in- 150 cm let hose Length of the water 150 cm outlet hose Length of the power 210 cm cord Max. draining height 100 cm Depending on the appliance specifications This product contains light sources from energy efficiency class F.
Page 60
BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY www.siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under Trademark License of Siemens AG *9001561168* 9001561168 (000610)