Table of Contents
Related Manuals for Siemens WM16XM92
Summary of Contents for Siemens WM16XM92
- Page 1 Washing machine WM16XM92 User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 6 Before using for the first time ... 20 1.1 General information.... 4 6.1 Starting an empty washing cycle ......... 20 1.2 Intended use....... 4 1.3 Restriction on user group... 4 7 Display ........ - Page 3 13.13 Unloading the laundry .. 33 19.3 Using the appliance again .. 52 13.14 Switching off the appli- 19.4 Disposing of old appliance .. 53 ance........ 33 20 Customer Service..... 53 14 Childproof lock...... 33 20.1 Product number (E-Nr.) and 14.1 Activating the childproof production number (FD).. 53 lock ......... 33 20.2 AQUA-STOP guarantee .. 54...
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. ▶ If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance Take note of the safety instructions when cleaning and performing maintenance work on the appliance. WARNING ‒ Risk of electric shock! Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. -
Page 10: Preventing Material Damage
en Preventing material damage Make sure that the valve housing ▶ 2 Preventing material for the water inlet hose does not come into contact with its sur- damage roundings and is not subjected to any external forces. Follow these instructions to avoid ma- Ensure that the inner diameter of terial damage and damage to the ap- ▶... -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Do not use cleaning products with Add detergent based on the laun- ▶ a high alcohol content. dry's degree of soiling. Do not use hard scouring pads or ▶ a For light to normal soiling, a smal- cleaning sponges. -
Page 12: Energy Saving Mode
en Installation and connection 3.3 Energy saving mode 4.2 Contents of package If you do not use the appliance for an After unpacking all parts, check for extended period, it automatically any damage in transit and complete- switches to energy-saving mode. ness of the delivery. Energy-saving mode ends when you ATTENTION! use the appliance again. - Page 13 Installation and connection en Installation loca- Requirements WARNING tion Risk of injury! When using the appliance on a base, Kitchen unit Only install the the appliance may tip over. appliance under- Always secure the feet of the appli- neath a continu- ▶...
-
Page 14: Removing The Transport Struts
en Installation and connection Unscrew and remove Put on the 4 cover caps. screws for the 4 transit bolts with a WAF 13 wrench. Press down on the 4 cover caps. Remove the power cable from the holder. 4.5 Removing the transport struts Remove the 4 sleeves. -
Page 15: Connecting The Appliance
Installation and connection en Remove the transport struts. 4.6 Connecting the appliance Connecting the water inlet hose WARNING Risk of electric shock! The appliance contains live parts. Touching live parts is dangerous. Do not immerse the electrical ▶ AquaStop valve in water. Connect the water inlet hose to a tap (26.4 mm = 3/4"). -
Page 16: Aligning The Appliance
en Installation and connection To align the appliance, turn the ap- Siphon Secure the con- pliance feet. Check that the appli- nection point with ance is level using a spirit level. a (24–40 mm) hose clamp. Sink Fix and secure the water outlet hose with an el- bow. - Page 17 Installation and connection en The connection details of the appli- ance can be found under Tech- nical data → Page 56. Check the mains plug is inserted properly.
- Page 18 en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Maintenance flap for the drain Transit bolts → Page 13 pump → Page 38 Water inlet hose → Page 15...
-
Page 19: Detergent Drawer
Familiarising yourself with your appliance en 5.2 Detergent drawer Measuring aid for liquid deter- gent → "Inserting the measuring aid for liquid detergent", Page 31 Compartment II: ¡ Detergent for main wash ¡ Water softener ¡ Bleach ¡ Stain remover Compartment ¡ Fabric softener ¡... -
Page 20: Before Using For The First Time
en first time Start the first wash cycle or press first time 6 Before using for the to switch off the appliance. → "Basic operation", Page 30 first time Prepare the appliance for use. first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory. -
Page 21: Display
Display en 7 Display The display shows the current settings, options or relevant information. display Designation More information 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining "Ready in" time → "Buttons", Page 23 9,0 kg Recommended The maximum load capacity for the selec- load ted programme in kg. - Page 22 en Display display Designation More information Childproof lock ¡ lights up: The childproof lock is activ- ated. ¡ flashes: The childproof lock is activated and the appliance has been operated. → "Deactivating the childproof lock", Page 33 Blood The stain type is activated. Grass The stain type is activated.
-
Page 23: Buttons
Buttons en 8 Buttons The selection of programme settings depends on the programme that is set. You can see the selection options for each programme in the overview for → "Programmes", Page 25. Button Selection More information Start/Nachlegen ¡ Start Start, cancel or pause the pro- (Start/Reload) gramme. - Page 24 en Buttons Button Selection More information Vorwäsche (Pre- ¡ Activate Activate or deactivate prewash, e.g. wash) for washing heavily soiled laundry. ¡ Deactivate Wasser Plus ¡ Activate Activate or deactivate a washing pro- (Water Plus) gramme with more water and an addi- ¡...
- Page 25 Programmes en 9 Programmes Note: The laundry's care labels provide you with additional information about programme selection. Care symbols on the care labels Programme Description Max. load (kg) Baumwolle Wash hard-wearing items made from cotton, linen (Cottons) or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate varioSpeed ...
- Page 26 en Programmes Programme Description Max. load (kg) Pflegeleicht Wash items made from synthetic or blended fab- (Easy Care) rics. Programme setting: ¡ Max. 60 °C ¡ Max. 1200 rpm Schnell/Mix Wash items made from cotton, linen, or synthetic or (Mixed Fabrics) blended fabrics.
-
Page 27: Laundry
Programmes en Programme Description Max. load (kg) Outdoor Im- Wash all-weather and outdoor clothing with mem- prägnieren brane technology and water-resistant equipment. (Outdoor/Water- Suitable for washing and then waterproofing. proofing) Use a detergent for outdoor fabrics. Use a waterproofing agent that is suitable for ma- chine-washing. - Page 28 en Programmes Programme Description Max. load (kg) The programme duration is approx. 30 minutes. If you wish to reduce the programme duration to 15 minutes, activate varioSpeed . The maximum load is reduced to 2,0 kg. Programme setting: ¡ Max. 40 °C ¡...
-
Page 29: Preparing The Laundry
– Close all zips, Velcro fasteners, in the digital instruction manual by scanning the QR code in the table of hooks and eyes – Tie cloth belts, apron strings, contents or on www.siemens- etc. together or use a laundry home.bsh-group.com . bag. 11.1 Preparing the laundry –... -
Page 30: Detergents And Care
Requirement: The appliance has been correctly installed and connec- Notes ted. ¡ More detailed instructions for use → "Installation and connection", can be found on www.siemens- Page 12 home.bsh-group.com or by scan- ning the QR code on the title page Press ▶ of this user manual. -
Page 31: Loading Laundry
operation en Insert the measuring aid. 13.4 Loading laundry Note: To prevent creasing, take note of the maximum load for the → "Programmes", Page 25. Requirement: The laundry is pre- pared. → "Laundry", Page 29 Open the door. Make sure that the drum is empty. Place the laundry in the drum. Close the door. -
Page 32: Adding Detergent And Care Product
en operation Fold the measuring aid down and a After the programme has ended, click it into place. the display shows: -0-. 13.9 Soaking laundry Note: No additional detergent is re- quired. The washing solution is then used for washing. Start the programme. To pause the programme, after ap- prox. -
Page 33: Resuming The Programme When The Programme Status Is Rinse Hold
Home Connect app, ad- just its basic settings and monitor its operating status. Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.siemens- home.bsh-group.com . -
Page 34: Connecting The Appliance To A Wlan Home Network (Wi-Fi) With Wps Function
en Home Connect The Home Connect services are not 15.1 Connecting the appli- available in every country. The avail- ance to a WLAN home ability of the Home Connect function network (Wi-Fi) with depends on the availability of Home Connect services in your coun- WPS function try. -
Page 35: Connecting The Appliance To A Wlan Home Network (Wi-Fi) Without Wps Func- Tion
Home Connect en In the Home Connect app, enter 15.2 Connecting the appli- the network name (SSID) and ance to a WLAN home password (key) for your home net- network (Wi-Fi) without work. WPS function Carry out the steps in the Home Connect app to connect the If your router does not have a WPS appliance. -
Page 36: Activating Wi-Fi On The Appliance
en Home Connect a If End is shown on the display, the 15.4 Activating Wi-Fi on the network settings are reset. appliance 15.7 Remote start Note: When Wi-Fi is activated, the en- ergy consumption increases in com- Enable the appliance for remote start parison to the values specified in the via the Home Connect app. -
Page 37: Data Protection
Diagnostics in your country, please in the digital instruction manual by visit the service/support section of scanning the QR code in the table of your local website: www.home-con- contents or on www.siemens- nect.com home.bsh-group.com . 15.9 Data protection Please see the information on data 17 Cleaning and servi-... -
Page 38: Cleaning The Detergent Drawer
en Cleaning and servicing Fit the insert and click it into place. 17.2 Cleaning the detergent drawer Pull out the detergent drawer. Press down on the insert and re- move the detergent drawer. Clean the opening for the deter- gent drawer. Pull out the insert upwards. Push in the detergent drawer. - Page 39 Cleaning and servicing en Open and remove the service flap. CAUTION - Risk of scalding! When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
- Page 40 en Cleaning and servicing Ensure that both impellers can Cleaning the drain pump turn. Requirement: The drain pump is empty. → Page 38 Since water may remain in the drain pump, unscrew the pump cap carefully. The filter insert in the pump ‒ housing may become stuck due to coarse particles of dirt.
-
Page 41: Cleaning The Intake Opening In The Rubber Gasket
Cleaning and servicing en Insert and close the service flap. 17.4 Cleaning the intake opening in the rubber gasket Regularly check the intake opening in the rubber gasket for any block- ages and clean the intake opening. Open the appliance door. Remove any blockages from the intake opening. -
Page 42: Troubleshooting
en Troubleshooting 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 43 Troubleshooting en Fault Cause and troubleshooting "E:30 / -80" The pump cap is not fully screwed in. Ensure that the pump cap is screwed in all the way ▶ into the appliance. The handle on the pump cap must be in a vertical position. "E:36 / -25 / -26"...
- Page 44 en Troubleshooting Fault Cause and troubleshooting "E:35 / -10" Call the after-sales service. ▶ → "Customer Service", Page 53 Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down).
- Page 45 Troubleshooting en Fault Cause and troubleshooting The appliance is not There has been a power cut. working. Check whether the lighting in your kitchen or other ▶ appliances are working. The programme does You have not pressed Start/Nachlegen. not start. Press Start/Nachlegen. ▶...
- Page 46 en Troubleshooting Fault Cause and troubleshooting The water is not drain- is activated. ing. Continue the programme by selecting Schleudern ▶ or Abpumpen and pressing Start/Nachlegen. → "Resuming the programme when the programme status is Rinse Hold", Page 33 The water outlet hose is connected too high. Install the water outlet hose at a maximum height of ▶...
- Page 47 Troubleshooting en Fault Cause and troubleshooting The spin cycle runs The unbalanced load detection system eliminates an several times. imbalance by repeatedly redistributing the laundry. Not a fault – no action required. ▶ Note: When loading, where possible, place large and small items of laundry together in the drum. Different sized items of laundry distribute themselves better during the spin cycle.
- Page 48 en Troubleshooting Fault Cause and troubleshooting Heavy foam build-up Detergent dosage is too high. Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into the left-hand compartment (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
- Page 49 Troubleshooting en Fault Cause and troubleshooting Loud noises during Transit bolts have not been removed. the spin cycle. Removing the transit bolts. ▶ Banging noises, rat- Foreign bodies have got into the drain pump. tling in the drain → "Cleaning the drain pump", Page 38 ▶...
- Page 50 en Troubleshooting Fault Cause and troubleshooting The spin result is not Note: Where possible, mix large and small items in satisfactory. The laun- the drum. Different sized items of laundry distribute dry is too wet/too themselves better during the spin cycle. damp. Start the Schleudern programme.
- Page 51 Troubleshooting en Fault Cause and troubleshooting Odours have formed Humidity and detergent residue may promote the in the appliance. formation of bacteria. → "Cleaning the drum", Page 37 ▶ If you are not using the appliance, leave the door ▶ and detergent drawer open so that residual water can evaporate.
-
Page 52: Emergency Release
→ "Before using for the first time", Note: You can find further information Page 20. in the digital instruction manual by scanning the QR code in the table of contents or on www.siemens- home.bsh-group.com . Turn off the water tap. Empty the water inlet hose. -
Page 53: Disposing Of Old Appliance
Customer Service en 19.4 Disposing of old appli- 20 Customer Service ance If you have any queries on use, are Valuable raw materials can be re- unable to rectify faults on the appli- used by recycling. ance yourself or if your appliance needs to be repaired, contact Cus- WARNING tomer Service. -
Page 54: Aqua-Stop Guarantee
en Customer Service Make a note of your appliance's de- tails and the Customer Service tele- phone number to find them again quickly. 20.2 AQUA-STOP guarantee In addition to warranty claims against the seller under the purchase agree- ment and in addition to our manufac- turer's warranty, we offer compensa- tion under the following conditions. -
Page 55: Consumption Values
Consumption values en 21 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456. Programme Load Pro-... -
Page 56: Technical Data
(Wi-Fi): 1,00 W Water pressure ¡ Minimum: A detailed RED Declaration of Con- 100 kPa formity can be found online at (1 bar) www.siemens-home.bsh-group.com ¡ Maximum: among the additional documents on 1000 kPa the product page for your appliance. (10 bar) Length of the wa- 150 cm... -
Page 57: Product Number (E-Nr.) And Production Number (Fd)
E-Nr.FD en A detailed Declaration of Conformity can be found online at www.siemens- home.bsh-group.com/uk/ among the Only applies to Great Britain additional documents on the product 2.4 GHz band (2400–2483.5 MHz): page for your appliance. Max. 100 mW 5 GHz band (5150–5350 MHz + 5470–5725 MHz): Max. - Page 60 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001700126* 9001700126 (011116)