Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Siemens WM16XK75NL
Summary of Contents for Siemens WM16XK75NL
- Page 1 Translated from Dutch to English - www.onlinedoctranslator.com Washing machine WM16XK75NL User manual and install ation instructions Register your product on My Siemens and discover exclusive services and off to/welcome siemens-home.bsh-group.c The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Refer to the Digital User's Guide for more information. Index 1 Safety..........4 6 Before using for the first time ....21 1.1 General instructions ....4 6.1 Starting a wash cycle without 1.2 Destination of the device laundry..........21 rate ........ - Page 3 15 Intelligent dosing system ..36 15.1 Starting the program with the intelligent dosing system ... 36 15.2 Filling the dosing container ..37 15.3 Contents of the dosing reservoir........37 15.4 Basic dosing amount ..38 16 Basic Settings ....39 16.1 Overview of the basic settings ........
-
Page 4: Safety
NLSafety 1 Safety Observe the following safety instructions. 1.1 General instructions sRead this manual carefully. sKeep the operating instructions and product information for future reference. for use or for subsequent owners. sDo not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: sto wash machine-safe textiles and wool by hand... -
Page 5: Safe Installation
SafetyNL 1.4 Secure installation Observe the safety regulations when installing the device. WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Only connect and use the device in accordance with the information on the type plate. ▶ Only connect the device to a mains supply with alternating current via a properly installed earthing socket. - Page 6 NLSafety ▶ Use only manufacturer-approved adapters and power cords. ▶ If the power cord is too short and a longer power cord is not available, contact an electrical retailer to adjust the home installation. WARNING ‒ Risk of injury! The heavy weight of the device can cause injuries when lifted. ▶...
-
Page 7: Safer Use
SafetyNL There is a tripping hazard with incorrectly laid hoses and mains connection cables. ▶ Lay the hoses and connection cables in such a way that they cannot be tripped over. If the appliance is moved by protruding parts, such as the loading door, the parts can break off. - Page 8 NLSafety WARNING ‒ Risk of health hazard! Children can lock themselves in the appliance and endanger their lives. ▶ Do not install the appliance behind a door that blocks or prevents the opening of the appliance door. ▶ In the case of discarded appliances, remove the plug of the mains cable from the socket, then cut the mains cable and damage the lock of the appliance door so that the appliance door no longer closes.
-
Page 9: Safe Cleaning And Maintenance
SafetyNL Reaching into the rotating drum can cause injury to hands. ▶ Wait for the drum to come to a complete stop before reaching inside the drum with your hand. CAUTION ‒ Risk of burns! The soap gets hot when washing at high temperatures. ▶... - Page 10 NLSafety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use original spare parts and original accessories from the manufacturer. WARNING ‒ Risk of poisoning! Toxic fumes can be generated when cleaning agents containing solvents are used.
-
Page 11: Avoiding Material Damage
Avoid material damageNL Make sure that the internal ▶ 2 Material damage diameter of the water tap is at least avoid 17 mm. Make sure that the thread length ▶ on the connection to the water Follow this instruction to avoid tap is at least 10 mm. -
Page 12: Environmental Protection And Saving
NLEnvironmental protection and saving Clean the device only with water ▶ Detergent according to the degree of and a soft, damp cloth. soiling of the laundry . ▶ Remove all detergent residues, spray aFor a light to normal extent mist residues or residues immediately of contamination, a small amount upon contact with the appliance. -
Page 13: Energy Saving Mode
Set up and connect Remove the accessories from the The device has an aqua sensor. drum. Close the appliance door. aThe aquasensor monitors during the flush adjusts the turbidity of the 4.2 Package contents flush water and adjusts the duration and number of flush cycles After unpacking, check all parts for accordingly. -
Page 14: Removing Transport Locks
NLSet up and connect installation site WARNING To demand Risk of injury! kitchen The device al- When used on a plinth, the device can borrow under a tip over. continuous work The device feet for commissioning ▶ place sheet, on a plinth must be absolutely that fixed with the with the fixings adjacent... -
Page 15: Removing Transport Reinforcements
Set up and connectNL Loosen and remove all bolts of the 4 Install the 4 cover caps. transport locks with a SW13 open- end wrench Push the 4 cover caps down. Remove the mains connection cable from the holder. 4.5 Removing transport reinforcements Remove the 4 sleeves. -
Page 16: Connecting The Device
NLSet up and connect Remove the transport 4.6 Connecting device reinforcements. Connect water supply hose WARNING Risk of electric shock! The device contains live parts. Touching live parts is dangerous. Do not immerse the electric ▶ Aquastop valve in water. Connect the water inlet hose to the tap (26.4 mm = 3/4"). -
Page 17: Adjusting The Device
Set up and connectNL To adjust the appliance, turn the The connection position appliance feet. Check the horizontal tie with a adjustment of the appliance with a hose clamp spirit level. (24-40 mm) bore gene. washbasin the water drainage feeding hose with a bend →... - Page 18 NLSet up and connect Insert the mains plug of the appliance's connecting cable into a socket in the vicinity of the appliance. The connection data of the device can be found in the technical data → Page 62 . Check the mains plug for tightness.
-
Page 19: Getting To Know Your Device
Getting to know your deviceNL 5 Getting to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the picture may differ, e.g. the color the V om m. -
Page 20: Control Panel
NLGetting to know your device maintenance products and the Manual Dosing Compartment information in the program descriptions. / : dispenser for fabric → "Programs", Page 28 softener or liquid detergent : dispenser for liquid detergent 1 2 3 5.3 Control panel You can set all functions of your device and obtain information about the operating status via the control panel. -
Page 21: Before Using For The First Time
usage aThe display shows the remaining Before first use program duration. aAfter the program end, it shows B prepare the device for use. display: -0- . Start the first wash cycle or press to switch off the appliance. 6.1 Start the wash cycle →... -
Page 22: Display
NLDisplay 7 Display The display shows the current setting values, options or information texts. name Display More information 0:40 Expected program duration or remaining Program duration / remaining time of time of the program in hours and minutes. the program →... - Page 23 DisplayNL name Display More information - 0- Program end Program status Child lock slights up: the childproof lock is activated. s flashes: the child lock is activated and the device was operated. → "Deactivate child lock", page 35 Energy consumption for the set Energy consumption programme.
- Page 24 NLDisplay name Display More information E:35 / -10 Error code, error indication, signal. Error Example...
- Page 25 TestsNL 8 Keys The selection of the program settings depends on the program set. Knob Choice More information Start/Refill sstart Start, cancel or pause program. sCancel spause varioSpeed sactivate Activate or deactivate reduced program duration. sdeactivate Remark:The energy consumption is higher.
- Page 26 NLTests Knob Choice More information Centrifuge - 1600 Adjust the spin speed or (rinse hold). Set spin speed in rpm. The selection does not drain the water at the end of the wash cycle and deactivates the spin cycle. The laundry remains in the rinse water.
- Page 27 TestsNL Knob Choice More information The laundry is so damp after washing that it hangs out well on the washing line.
-
Page 28: Programs
NLPrograms 9 Programs Remark:The care labels on the laundry give you additional information on program selection. Max. Program Description bela- thing (kg) 10.0 Cotton Wash hard-wearing cotton, linen and blended fabrics. Also suitable as a shortened program for normally soiled laundry if you activate varioSpeed. Program setting: smax. - Page 29 ProgramsNL Max. Program Description bela- thing (kg) Fast + Mix Wash textiles made of cotton, linen, synthetic materials and blended fabrics. Suitable for lightly soiled laundry. Program setting: smax. 60 °C smax. 1600 rpm Delicate silk Wash delicate, washable textiles made of silk, viscose and synthetics.
- Page 30 NLPrograms Max. Program Description bela- thing (kg) Wash hard-wearing cotton, linen and blended Hygiene fabrics. Suitable for allergy sufferers and with high hygiene requirements. Remark:When the set temperature is reached, it remains constant throughout the washing process. Program setting: smax. 60 °C smax.
- Page 31 ProgramsNL Max. Program Description bela- thing (kg) Do not use fabric softener. Do not use wool, delicate or liquid detergent. Remark:If you have not used a program with a temperature of 60 °C or higher for a long time, the drum cleaning indicator flashes as a reminder.
-
Page 32: Accessories
NLaccessories 10 Accessories Use only original accessories. These are adapted to the device. Remark:Some accessories are available in other colours. Contact the → "Customer Service", page 59 . Usage Order number Cold water or Aquastop WZ10131 Extension water supply water inlet hose feeding hose lengthen (2.50 m). -
Page 33: Detergent And Care Ginger
QR code in up and connected. → the table of contents or at "Setting up and siemens-home.bsh-group.com . connecting", Page 13 Press . ▶ sTake the information regarding Safe- ness → Page 4 and Avoid material The power-on process takes a few damage →... -
Page 34: Laundry
NLService Comments Remark:Keep the directions for detergent and care agent → Page 33 sThe program settings will be not stored permanently for the program. Pull out the detergent drawer. sWhen you use the intelligent dosing Fill with detergent. activates or deactivates the →... -
Page 35: Program Cancel
Child lockNL Reload or remove the laundry. Wipe the rubber sleeve dry and remove any foreign objects. Close the door. onStart/Refill to press. 13.8 Program Cancel onStart/Refill to press. Open the appliance door. At high temperature and high water level, the appliance door remains locked for safety reasons. -
Page 36: Intelligent Dosing System
NLIntelligent dosing system In order not to cancel the current sFill the detergent or detergent program, the program selector softer in the manual dosing must be set to the initial program. dispenser. → "Dosing detergent and care agent", Page 34 sActivate the agoes out in the display intelligent dosing system tem after the program end. -
Page 37: Filling The Dosing Container
Intelligent dosing systemNL Remove the laundry. Liquid detergent and wash → "Taking out the laundry", Page 35 softener into the appropriate dosing containers. → "Detergent drawer", Page 19 15.2 Filling the dosing container If you want to use the intelligent dosing system or if the device shows an indication during use, fill the dosing containers. -
Page 38: Basic Dosing Amount
NLIntelligent dosing system Adjusting the contents of the dosing container i-Dos . Press . for approx. 3 s Pressi-Dos set. in te aThe display shows reflected to give. Press . againi-Dos configure. To finish the setting, wait briefly. 15.4 Basic dosing amount The basic dosing amount is based on the detergent manufacturer's information, the water hardness and... -
Page 39: Basic Settings
Basic settingsNL 16 Basic Settings You can configure the basic settings of your device according to your needs. 16.1 Overview of the basic settings Basic setting Description program position Where the Signal 0 (off) The volume of 1 (soft) the signal after 2 (average) the program end Set up. -
Page 40: Changing Basic Settings
NLCleaning and maintenance 16.2 Changing basic settings 17.1 Cleaning the drum CAREFULLY Set the program selector to Risk of injury! position 1. Permanent washing at low temperatures and lack of ventilation of the appliance can damage the drum and cause injuries. Regularly run a drum cleaning ▶... - Page 41 Cleaning and maintenanceNL Press the insert down and remove Empty the detergent drawer. the detergent drawer. Clean the pump unit with a Remove the pump unit. damp cloth. Unlock and remove the detergent Clean the detergent drawer and lid drawer lid. with a soft, damp cloth or hand shower.
-
Page 42: Cleaning The Drain Pump
NLCleaning and maintenance Turn off the device. Disconnect the plug of the device from the mains. Open and remove the service door. Place a sufficiently large container under the opening. Clean the housing of the detergent drawer in the appliance. Remove the drain hose from the holder. - Page 43 Cleaning and maintenanceNL Cleaning the drain pump CAUTION - Risk of burns!The soap gets hot when washing at high Required:The drain pump is empty. → Page 42 temperatures. As there may still be residual ▶ Do not touch the hot soapy water. water in the pump, carefully Pull off the sealing cap to allow the unscrew the lid.
-
Page 44: Cleaning The Inlet Opening In The Rubber Sleeve
NLCleaning and maintenance Make sure that both wing wheels Install and close the service door. can be turned. 17.4 Cleaning the inlet opening Install the pump cover. in the rubber sleeve Check that the pump cover Regularly check the inlet opening in components are correctly the rubber sleeve for blockages and assembled. -
Page 45: Troubleshooting
TroubleshootingNL 18 Troubleshooting You can remedy minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the device. ▶... - Page 46 NLTroubleshooting Cause and Troubleshooting Malfunction "E:30 / -80" When dosing manually, reduce the amount of ▶ detergent for the next wash with an equal load. Unauthorized extension mounted on the water drain hose. Remove any unauthorized extensions from the ▶ water drain hose.
- Page 47 TroubleshootingNL Cause and Troubleshooting Malfunction "E:60 / -2B" The unbalance detection system has interrupted the spin cycle due to uneven distribution of the laundry. Redistribute the laundry in the drum. ▶ Remark:If possible, place large and small items of laundry together in the drum. Different sized laundry is more evenly distributed during the spin cycle.
- Page 48 NLTroubleshooting Cause and Troubleshooting Malfunction Place the pump unit in the detergent drawer. → "Cleaning the detergent drawer", Page Slide in the detergent drawer until the symbol goes out. Detergent dosage is too high. Immediate measure: mix a tablespoon of fabric ▶...
- Page 49 TroubleshootingNL Cause and Troubleshooting Malfunction "E:30/-20" Additional water filled. ▶ Do not fill the device with additional water during operation. Device not working. Mains plug of the power cable is not plugged in. Connect the appliance to the mains. ▶ The fuse in the fuse box has tripped.
- Page 50 NLTroubleshooting Cause and Troubleshooting Malfunction Remark:Until the fault has been rectified, you can Program does not start. deactivate the intelligent dosing system and dose manually. → "Buttons", Page 25 Detergent drawer is not fully retracted. ▶ Slide in the detergent drawer until the symbol goes out. Door cannot be is activated.
- Page 51 TroubleshootingNL Cause and Troubleshooting Malfunction Washing water is not Immediate measure: mix a tablespoon of fabric ▶ pumped out. softener with 0.5 l of water and pour this mixture into the manual dosing compartment (not for outdoor, sportswear and down textiles). When the intelligent dosing is activated, reduce the ▶...
- Page 52 NLTroubleshooting Cause and Troubleshooting Malfunction No error - no action required. ▶ The program duration changes during the wash Remark:When loading, place large and small items of cycle. laundry together in the drum. Different sized laundry is more evenly distributed during the spin cycle. Foam control system provides an extra rinse when foaming is too high.
- Page 53 TroubleshootingNL Cause and Troubleshooting Malfunction i-Dos i-Dos Program progress does not allow intelligent dosing. No cannot be pressed solution possible. High spin speed Low spin speed is set. rental is not Set a higher spin speed for the next wash. ▶...
- Page 54 NLTroubleshooting Cause and Troubleshooting Malfunction Short buzzing sound Intelligent dosing system performs a function test. after switching on No error - normal operating noise. ▶ of the device. Loud noise during The appliance is not leveled properly. → "Adjusting the device", Page 17 spinning.
- Page 55 TroubleshootingNL Cause and Troubleshooting Malfunction Spin result is Remark:If possible, place large and small items of not to satisfaction- laundry together in the drum. Different sized laundry is more evenly distributed during the spin cycle. ness. The laundry is too wet / too damp. Start the programCentrifuge .
- Page 56 NLTroubleshooting Cause and Troubleshooting Malfunction Detergent residue on Empty the dosing containers. → "Cleaning the detergent drawer", Page the dry laundry. Clean the dosing containers. Refill the dosing containers. → "Filling the dosing container", page 37 Basic dosing amount not set correctly. When the intelligent dosing is activated, reduce the ▶...
- Page 57 TroubleshootingNL Cause and Troubleshooting Malfunction Water drain hose is not connected correctly. Water is leaking from Connect the water drain hose correctly. ▶ the water drain hose. → "Drainage connection types", page 16 Odor has formed in Humidity and detergent residue can encourage the appliance bacterial growth.
-
Page 58: Emergency Release
NLTransport, storage and disposal Let the suds drain. 18.1 Emergency release → "Cleaning the drain unlock door pump", page 42 Disassemble the hoses. Required:The drain pump is empty. → Page 42 Empty the dosing containers. 1. ATTENTION!Running water can 19.2 Installing transport locks lead to material damage. -
Page 59: Disposal Of Your Old
customer serviceNL 19.4 Disposal of your old chemical equipment (waste electrical and electronic device equipment - WEEE). Environmentally friendly disposal The directive sets the allows valuable raw materials to be framework for the take- reused. back valid in the EU and disposal of old appliances. -
Page 60: Aqua-Stop Guarantee
NLcustomer service son the inside of the bottom picture if you go on holiday for a few weeks, the tap should be turned holding valve. son the back of the device off. honeycomb. In order to quickly find your device data and the service telephone numbers, you can write down the data. -
Page 61: Consumption Values
Consumption valuesNL 21 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The specified values for other programs asEco 40-60are only guide values and have been determined in accordance with the applicable standard EN60456. The automatic dosing function has been disabled for this purpose. Notes on the comparative test: deactivate the automatic dosing function, unless this function is the subject of the test. -
Page 62: Technical Data
NLTechnical data This product contains light sources of 22 Technical data energy class F. The light sources are available as spare parts and may only be replaced by a trained technician. Device height 84.8 cm Device width 59.8cm Device depth 59.0 cm You can find more information about your Device depth... - Page 64 BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 Munich, GERMANY siemens-home.bsh-group.com Manufactured by BSH Hausgeräte GmbH under the trademark license of Siemens AG * 9001753830* 9001753830 (020704)