Related Manuals for Siemens WM10K21SME
Summary of Contents for Siemens WM10K21SME
- Page 1 Washing machine WM10K21SME siemens-home.com/welcome Register your product online ens-home.com/welcome...
- Page 2 Additional information about our Note / Tip products, accessories, spare parts and services can be found at: www.siemens- Instructions on how to best use the home.com or contact our customer appliance as well as other useful service centers.
-
Page 3: Table Of Contents
Contents e n W a s h i n g m a c h i n e I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use After-sales service ..29 Intended use Consumption rates ..30 For private domestic use only. ■ I n t e n d e d u s e The washing machine is suitable for Energy and water consumption, ■... -
Page 5: Safety Instructions
Safety instructions Reaching into the drum Safety instructions ■ when it is turning can cause injuries to hands. Electrical safety Do not reach into the drum S a f e t y i n s t r u c t i o n s when it is turning. - Page 6 Safety instructions Cut through the mains cable Warning ■ and remove it, along with Eye/skin irritation! plug. Detergents and care products Destroy the lock on the may cause irritation if they ■ washing machine door. come into contact with the eyes or skin.
-
Page 7: Environmental Protection
Environmental protection Wash normally soiled laundry ■ Environmental without a prewash. protection Save energy and detergent when ■ washing lightly and normally soiled Packaging/used appliance laundry. ~ Page 12 E n v i r o n m e n t a l p r o t e c t i o n Dispose of packaging in an Energy-saving mode: The display ■... -
Page 8: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Turn on the water Sort the laundry. Open the door. plug. tap. -------- Select a programme Observe the... -
Page 9: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e ( Detergent drawer ~ Page 19 8 Washing machine door with window handle 0 Controls/display elements 9S Open the washing machine door... -
Page 10: Control Panel
Getting to know the appliance Control panel ( Programme selector for selecting a programme and @ Start/Reload ! for starting, for switching the machine on and off interrupting (adding laundry) and cancelling a programme 0 °C temperature, 0 spin speed, 0 H Display panel for settings and Ready in time for changing the programme default information... -
Page 11: Laundry
Laundry You can find examples of levels of Laundry soiling on ~ Page 12 – Light: Do not prewash, select the P repare the laundry G Speed setting if necessary L a u n d r y – Normal Caution! –... -
Page 12: Detergent
Detergent Detergent Saving Soiling/note Reduced temper- Light C orrect selection of detergent ature and deter- No visible dirt or stains. Cloth- D e t e r g e n t gent quantity as ing has taken on some body The care label is crucial for selecting per the recom- odour, e.g.: the correct detergent, temperature and... -
Page 13: Overview Of Programmes
Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Name of programme Max. load; Brief explanation of the programme and for which fabrics it is suita- * Reduced load for the G Speed ble. - Page 14 Overview of programmes Programme/type of laundry/information Settings W Í Wool Max. 2 kg Hand or machine-washable fabrics made of wool or that contain Cold - 40 °C wool; – – – ... 800 rpm Particularly gentle wash programme to prevent shrinkage of laundry, with longer programme breaks (fabrics rest in the detergent solu- tion) Notes...
-
Page 15: Starching
Overview of programmes Programme/type of laundry/information Settings ; Hygienic Max. 7.5 kg/5* kg Hard-wearing textiles. Cold - 60 °C Note: For especially sensitive skin, extended wash cycle at higher – – – ... 1000** rpm water level, additional rinse cycle. ¦, G, æ... -
Page 16: Programme Default Settings
Programme default settings Overview of programmes ~ Page 13 Programme default settings 5 (Ready in) time When you select the programme, the The temperature, spin speed and relevant programme duration is P r o g r a m m e d e f a u l t s e t t i n g s programme duration ("Ready in"... -
Page 17: Additional Programme Settings17
Additional programme settings Close the washing machine door. Operating the Press the Start/Reload ! button. The preselected time continues to appliance run. Preparing the washing O p e r a t i n g t h e a p p l i a n c e machine The washing machine must be Note:... -
Page 18: Change The Programme Default Settings
Operating the appliance Change the programme Placing laundry into the drum default settings Warning You can use the default settings or Danger of death! change them. Items of laundry pretreated with cleaning agents that contain solvents, To do this, repeatedly select the e.g. -
Page 19: Measure And Add Detergent And Care Products
Operating the appliance Measure and add detergent and care products Caution! Damage to the appliance Cleaning agents and agents for pretreating laundry (e.g. stain removers, prewash sprays, etc.) may cause Measuring aid A For liquid detergent damage if they come into contact with Compartment II Detergent for the main wash, the surfaces of the washing machine. -
Page 20: Start The Programme
Operating the appliance appropriate dispenser and place it in Adding laundry the drum. After starting the programme, you can add or remove laundry as required. Start the programme To do this, press the Start/Reload ! Select the Start/Reload ! button. The button. -
Page 21: Programme End During Rinse Hold
Operating the appliance Press Start/Reload !. Always wait for the end of the ■ programme, otherwise the appliance For programmes at low temperatures: may still be locked. Then switch on Press Start/Reload !. the appliance and wait for it to Select 0 Spin or p Empty. -
Page 22: Sensors
Sensors Sensors A utomatic load sensing S e n s o r s The automatic load sensing function adapts the water consumption ideally to each programme depending on the type of fabric and the load. Unbalanced load detection system The automatic unbalanced load detection system detects imbalances and ensures even distribution of the laundry by repeatedly starting and... -
Page 23: Setting The Signal
Setting the signal Setting the signal S e t t i n g t h e s i g n a l 1. Einstellmodus für die Signallautstärke aktivieren Set to Û. Press and hold the 0 button and turn one Press and hold the button for approx. -
Page 24: Cleaning And Maintenance
Cleaning and maintenance be obtained via our website or from our Cleaning and after-sales service. maintenance Detergent drawer and housing Warning C l e a n i n g a n d m a i n t e n a n c e If the washing machine contains Danger of death! detergent or fabric softener residues:... -
Page 25: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Open and remove the service flap. To prevent unused detergent Note: from flowing straight into the drain during the next wash: Pour 1 litre of water into compartment II and start the p Empty programme. The drain hose at the siphon is blocked Take the drain hose out of the Switch off the appliance. -
Page 26: Faults And What To Do About Them
Faults and what to do about them. Warning Risk of injury! You may injure your hands if you reach into the drum while it is turning. Do not reach into the drum when it is turning. Wait until the drum has stopped turning. For standard and Aqua-Secure Caution! models, clean the filter on the rear of... -
Page 27: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/remedial action The washing machine door is unlocked. It is possible to add laundry. The temperature is too high. Wait until the temperature falls. ■ Water level too high. Not possible to add laundry. If necessary, close the wash- ■... - Page 28 Faults and what to do about them. Faults Cause/remedial action Programme does not Start/Reload ! pressed or 0 "Ready in" time selected? ■ start. Washing machine door closed? ■ E Childproof lock activated? To deactivate: ■ Detergent solution is not –...
-
Page 29: After-Sales Service
After-sales service Faults Cause/remedial action NO appears on the dis- Water level too high. Not possible to add laundry. Close the washing ■ play panel in reload machine door immediately, if necessary. mode. To continue the programme, press Start/Reload !. ■... -
Page 30: Consumption Rates
Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy consumption* Water* Programme duration* Cottons 20 °C... -
Page 31: Technical Data
Technical data Standard programmes for cottons in accordance with regulation Load Programme du- (EU) no. 1015/2010 ration Cottons ú programme + Eco button 8 kg 3 _ h Cottons ú programme + Eco button 4 kg 3 _ h Cottons û programme + Eco button 4 kg 3 ] h Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU with cold... -
Page 32: Positioning And Connecting
Positioning and connecting P Water supply hose on standard/Aqua- Positioning and Secure models connecting *depending on the model Included with the appliance In addition, a hose clamp ( 24 - 40 mm P o s i t i o n i n g a n d c o n n e c t i n g diameter, available from specialist Check the machine for transport Note:... -
Page 33: Installation Surface
Positioning and connecting leaks and water damage, you must Do not remove the appliance covering follow the instructions in this section. plate. Notes Notes In addition to the safety information Recess width of 60 cm required. ■ ■ listed here, the local water and Only install the washing machine ■... -
Page 34: Hose And Cable Lengths
Positioning and connecting Unscrew and remove all four transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. Fit the covers. Lock the covers firmly The following are available from Tip: in place by applying pressure to the specialist dealers/the after-sales snap-in hooks. -
Page 35: Water Outlet
Positioning and connecting Only tighten the screw connections Open the water tap carefully, Note: ■ by hand. If the screw connections checking the leak tightness of the are tightened too much with a tool connection points. The screw (pliers), the thread may be connection is under mains water damaged. -
Page 36: Levelling
Positioning and connecting In doing so, hold the foot tight and do not adjust its height. The lock nuts on all four appliance feet must be screwed tightly against the housing. Drainage into a siphon ■ The connection point must be secured using a hose clamp with a diameter of 24-40 mm (available from specialist dealers). -
Page 37: Before Washing For The First Time
Positioning and connecting The mains cable is only replaced by To prevent foaming, only use Note: ■ a qualified electrician (if this is half of the amount of detergent necessary). Replacement mains recommended by the detergent cables are available from the after- manufacturer. - Page 38 Positioning and connecting Before initial use: Notes The transport locks must be ■ removed. To prevent unused detergent from ■ flowing straight into the drain during the next wash: Pour approximately 1 litre of water into compartment II and select and start the [ Empty programme.
- Page 40 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com *9001050411* 9001050411 (9501)