Related Manuals for Siemens WM10K160GR
Summary of Contents for Siemens WM10K160GR
- Page 1 Washing machine WM10K160GR siemens-home.com/welcome Register your product online ens-home.com/welcome...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n W a s h i n g m a c h i n e I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Select programme/switch on the Intended use. -
Page 4: Intended Use
Intended use moisture for the main washing Intended use programmes ....28 Efficiency test programmes for cotton For private domestic use only. fabrics ..... . . 28 ■... -
Page 5: Safety Instructions
Safety instructions Reaching into the drum Safety instructions ■ when it is turning can cause injuries to hands. Electrical safety Do not reach into the drum S a f e t y i n s t r u c t i o n s when it is turning. - Page 6 Safety instructions Cut through the mains cable Warning ■ and remove it, along with Eye/skin irritation! plug. Detergents and care products Destroy the lock on the may cause irritation if they ■ washing machine door. come into contact with the eyes or skin.
-
Page 7: Environmental Protection
Environmental protection Wash normally soiled laundry ■ Environmental without a prewash. protection Save energy and detergent when ■ washing lightly and normally soiled Packaging/used appliance laundry. ~ Page 12 E n v i r o n m e n t a l p r o t e c t i o n Dispose of packaging in an Energy-saving mode: The display ■... -
Page 8: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Turn on the water Sort the laundry. Open the door. plug. tap. -------- Select a programme Observe the... -
Page 9: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e ( Detergent drawer ~ Page 17 8 Washing machine door with window handle 0 Controls/display elements 9S Open the washing machine door... -
Page 10: Control Panel
Getting to know the appliance Control panel ( Programme selector for selecting a programme and @ Έvαρξη/Παύση ! (Start/ for switching the machine on and off Pause) for starting, interrupting (adding laundry) and cancelling a programme 0 temperature, spin speed for changing the H Display panel for settings and programme default settings information... -
Page 11: Laundry
Laundry You can find examples of levels of Laundry soiling on ~ Page 12 – Light: Do not prewash, select the P repare the laundry G Speed setting if necessary L a u n d r y – Normal Caution! –... -
Page 12: Detergent
Detergent Detergent Saving Soiling/note Reduced temper- Light C orrect selection of detergent ature and deter- No visible dirt or stains. Cloth- D e t e r g e n t gent quantity as ing has taken on some body The care label is crucial for selecting per the recom- odour, e.g.: the correct detergent, temperature and... -
Page 13: Overview Of Programmes
Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load; Brief explanation of the programme and for which fabrics it is suita- * Reduced load for the Speed Per- ble. -
Page 14: Starching
Overview of programmes Programme/type of laundry/information Settings W Μάλλινα (Wool) Max. 2 kg Hand- or machine-washable fabrics that are made of wool or contain 30 °C wool; – – – ... 800 rpm particularly gentle wash programme to prevent laundry from shrink- ing, with longer programme breaks (fabrics rest in the detergent solution) Notes... -
Page 15: Programme Default Settings
Programme default settings Before starting the programme, the Programme default programme end ("Ready in" time) can be preselected in increments of one settings hour (h = hours) up to a maximum of 24 hours. The temperature, spin speed and P r o g r a m m e d e f a u l t s e t t i n g s programme duration ("Ready in"... -
Page 16: Additional Programme Settings16
Additional programme settings Select programme/switch on Additional programme the appliance settings If you have activated the Note: G speedPerfect childproof lock, you must first deactivate A d d i t i o n a l p r o g r a m m e s e t t i n g s it before you can set a programme. -
Page 17: Placing Laundry Into The Drum
Operating the appliance The indicator lamp for the button lights after another. It is possible to change up if a setting is active. the settings. The settings are not saved when the Measure and add detergent appliance is switched off. and care products Additional settings ~ Page 16 Overview of programmes from... -
Page 18: Start The Programme
Operating the appliance appropriate dispenser and place it in the drum. Start the programme Select the Start/Pause A button. The indicator lamp lights up and the programme starts. Measuring aid A For liquid detergent During the programme, the display panel shows the "Ready in" time or, Compartment II Detergent for the main wash, after starting the wash programme, the... -
Page 19: Adding Laundry
Operating the appliance Adding laundry To cool the laundry: Select Rinse. Press Start/Pause . After starting the programme, you can For programmes at low temperatures: add or remove laundry as required. Press Start/Pause. To do this, press the Start/Pause Select Spin or Empty. button. -
Page 20: Sensors
Sensors Remove any foreign objects from the Place large and small items of Note: ■ drum and the rubber seal – risk of laundry evenly in the drum. ~ Page 25 rusting. Leave the washing machine door ■ and detergent drawer open so that any residual water can dry away. -
Page 21: Setting The Signal
Setting the signal Setting the signal S e t t i n g t h e s i g n a l 1. Activate setting mode for the signal volume Set to Û. Press and hold the 0 button + turn one Press and hold the button for approx. -
Page 22: Cleaning And Maintenance
Cleaning and maintenance be obtained via our website or from our Cleaning and after-sales service. maintenance Detergent drawer and housing Warning C l e a n i n g a n d m a i n t e n a n c e If the washing machine contains Danger of death! detergent or fabric softener residues:... -
Page 23: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Open and remove the service flap. To prevent unused detergent Note: from flowing straight into the drain during the next wash: Pour 1 litre of water into compartment II and start the [ Empty programme. The drain hose at the siphon is blocked Take the drain hose out of the Switch off the appliance. -
Page 24: Faults And What To Do About Them
Faults and what to do about them. Warning Risk of injury! You may injure your hands if you reach into the drum while it is turning. Do not reach into the drum when it is turning. Wait until the drum has stopped turning. For standard and Aqua-Secure Caution! models, clean the filter on the rear of... -
Page 25: Information On The Display Panel
Faults and what to do about them. Information on the display panel Display Cause/remedial action The washing machine door is unlocked. It is possible to add laundry. Temperature too high. Wait until the temperature drops. ■ Water level too high. Not possible to add laundry. Close the washing machine ■... - Page 26 Faults and what to do about them. Faults Cause/remedial action Detergent solution is not – – – 0 (Rinse hold = without final spin) selected? ■ drained. Clean the detergent solution pump. ~ Page 22 ■ Clean the waste pipe and/or drainage hose. ■...
-
Page 27: After-Sales Service
After-sales service Faults Cause/remedial action YES appears in the dis- The washing machine door is unlocked. It is possible to add laundry. play panel in reload mode. If you cannot correct a fault yourself (after switching off/on) or a repair is required: Turn the programme selector to Off. -
Page 28: Consumption Rates
Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy consumption* Water* Programme duration* Cottons 20 °C... -
Page 29: Technical Data
Technical data Standard programmes for cottons in accordance with regulation Load Programme du- (EU) no. 1015/2010 ration Cottons programme ú 8 kg 3 _ h Cottons programme ú 4 kg 3 _ h Cottons programme û 4 kg 3 ] h Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU with cold water (15 °C). -
Page 30: Positioning And Connecting
Positioning and connecting P Water supply hose on standard/Aqua- Positioning and Secure models connecting *depending on the model Included with the appliance In addition, a hose clamp ( 24 - 40 mm P o s i t i o n i n g a n d c o n n e c t i n g diameter, available from specialist Check the machine for transport Note:... -
Page 31: Installation Surface
Positioning and connecting leaks and water damage, you must Do not remove the appliance covering follow the instructions in this section. plate. Notes Notes In addition to the safety information Recess width of 60 cm required. ■ ■ listed here, the local water and Only install the washing machine ■... -
Page 32: Hose And Cable Lengths
Positioning and connecting Unscrew and remove all four transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. Fit the covers. Lock the covers firmly The following are available from Tip: in place by applying pressure to the specialist dealers/the after-sales snap-in hooks. -
Page 33: Water Outlet
Positioning and connecting Only tighten the screw connections Open the water tap carefully, Note: ■ by hand. If the screw connections checking the leak tightness of the are tightened too much with a tool connection points. The screw (pliers), the thread may be connection is under mains water damaged. -
Page 34: Levelling
Positioning and connecting In doing so, hold the foot tight and do not adjust its height. The lock nuts on all four appliance feet must be screwed tightly against the housing. Drainage into a siphon ■ The connection point must be secured using a hose clamp with a diameter of 24-40 mm (available from specialist dealers). -
Page 35: Before Washing For The First Time
Positioning and connecting The mains cable is only replaced by To prevent foaming, only use Note: ■ a qualified electrician (if this is half of the amount of detergent necessary). Replacement mains recommended by the detergent cables are available from the after- manufacturer. - Page 36 Positioning and connecting Before initial use: Notes The transport locks must be ■ removed. To prevent unused detergent from ■ flowing straight into the drain during the next wash: Pour approximately 1 litre of water into compartment II and select and start the Empty programme.
- Page 38 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com *9000960198* 9000960198 (9402)