Related Manuals for Siemens WM10K161GR
Summary of Contents for Siemens WM10K161GR
- Page 1 Washing machine WM10K161GR siemens-home.com/welcome Register your product online ens-home.com/welcome...
- Page 2 Additional information about our Note / Tip products, accessories, spare parts and services can be found at: www.siemens- Instructions on how to best use the home.com or contact our customer appliance as well as other useful service centers.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Select programme/switch on the Intended use. -
Page 4: Intended Use
Intended use moisture for the main washing Intended use programmes ....28 Efficiency test programmes for cotton For private domestic use only. fabrics ..... . . 29 ■... -
Page 5: Safety Instructions
Safety instructions Reaching into the drum Safety instructions ■ when it is turning can cause injuries to hands. Electrical safety Do not reach into the drum S a f e t y i n s t r u c t i o n s when it is turning. - Page 6 Safety instructions Cut through the mains cable Warning ■ and remove it, along with Eye/skin irritation! plug. Detergents and care products Destroy the lock on the may cause irritation if they ■ washing machine door. come into contact with the eyes or skin.
-
Page 7: Environmental Protection
Environmental protection Energy-saving mode: The display ■ Environmental panel lighting goes out after a few minutes and Start flashes. To protection activate the lighting, press any button. Packaging/used appliance Energy-saving mode is not activated E n v i r o n m e n t a l p r o t e c t i o n if a programme is running. -
Page 8: Main Points In Brief
Main points in brief Main points in brief M a i n p o i n t s i n b r i e f Connect the mains Turn on the water Sort the laundry. Open the door. plug. tap. -------- Select a programme Observe the... -
Page 9: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e ( Detergent drawer ~ Page 17 8 Washing machine door with window handle 0 Controls/display elements 9S Open the washing machine door... -
Page 10: Control Panel
Getting to know the appliance Control panel ( Programme selector for selecting a programme and @ Έvαρξη/Παύση ! (Start/ for switching the machine on and off Pause) for starting, interrupting (adding laundry) and cancelling a programme 0 temperature,spin speed for changing the H Display panel for settings and programme default settings information... -
Page 11: Laundry
Laundry You can find examples of levels of Laundry soiling on ~ Page 12 – Light: Do not prewash, select the P repare the laundry G Speed setting if necessary L a u n d r y – Normal Caution! –... -
Page 12: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 13: Overview Of Programmes
Overview of programmes Overview of programmes Programmes on the programme selector O v e r v i e w o f p r o g r a m m e s Programme/type of laundry/information Settings Programme name Max. load; Brief explanation of the programme and for which fabrics it is suita- * Reduced load for the Speed Per- ble. -
Page 14: Starching
Overview of programmes Programme/type of laundry/information Settings W Μάλλινα (Wool) Max. 2 kg Hand- or machine-washable fabrics that are made of wool or contain 30 °C wool; – – – ... 800 rpm particularly gentle wash programme to prevent laundry from shrink- ing, with longer programme breaks (fabrics rest in the detergent solution) Notes... -
Page 15: Programme Default Settings
Programme default settings Before starting the programme, the Programme default programme end ("Ready in" time) can be preselected in increments of one settings hour (h = hours) up to a maximum of 24 hours. The temperature, spin speed and P r o g r a m m e d e f a u l t s e t t i n g s programme duration ("Ready in"... -
Page 16: Additional Programme Settings16
Additional programme settings Select programme/switch on Additional programme the appliance settings If you have activated the Note: G speedPerfect childproof lock, you must first deactivate A d d i t i o n a l p r o g r a m m e s e t t i n g s it before you can set a programme. -
Page 17: Placing Laundry Into The Drum
Operating the appliance The indicator lamp for the button lights after another. It is possible to change up if a setting is active. the settings. The settings are not saved when the Measure and add detergent appliance is switched off. and care products Additional settings ~ Page 16 Overview of programmes from... -
Page 18: Start The Programme
Operating the appliance appropriate dispenser and place it in the drum. Start the programme Select the Start/Pause A button. The indicator lamp lights up and the programme starts. Measuring aid A For liquid detergent During the programme, the display panel shows the "Ready in" time or, Compartment II Detergent for the main wash, after starting the wash programme, the... -
Page 19: Adding Laundry
Operating the appliance Adding laundry To cool the laundry: Select Rinse. Press Start/Reload . After starting the programme, you can For programmes at low temperatures: add or remove laundry as required. Press Start/Reload. To do this, press the Start/Reload Select Spin or Drain. button. -
Page 20: Sensors
Sensors Remove any foreign objects from the ■ Sensors drum and the rubber seal – risk of rusting. A utomatic load sensing S e n s o r s The automatic load sensing function adapts the water consumption ideally to each programme depending on the type of fabric and the load. -
Page 21: Cleaning And Maintenance
Cleaning and maintenance 2. Set the volume for the button signals (depending on model) Press the button repeatedly until the desired To level 3 Set to Û to exit the setting mode for the sig- volume is reached. nal volume. 3. -
Page 22: Drum
Cleaning and maintenance Remove the detergent residue Detergent solution pump ■ immediately. blocked Do not clean with a water jet. ■ Warning Drum Risk of scalding! When you wash at high temperatures, Use chlorine-free cleaning agents and the water gets very hot. If you come into not steel wool. -
Page 23: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Filter in the water supply blocked For this, first reduce the water pressure in the supply hose: Turn off the water tap. Select any programme (except Rinse//Spin/Empty). Place the service flap back on, lock Press Start. Allow the programme to it into place, and close it. -
Page 24: Faults And What To Do About Them
Faults and what to do about them. Wait until the drum has stopped turning. Faults and what to do Caution! about them. Water damage Any escaping water may cause water Emergency release damage. F a u l t s a n d w h a t t o d o a b o u t t h e m . e.g. -
Page 25: Faults And What To Do About Them
Faults and what to do about them. Display Cause/remedial action E:18 Detergent solution pump blocked. Clean the detergent solution pump. ■ ~ Page 22 Drain hose/waste pipe blocked. Clean the drain hose on the siphon. ■ ~ Page 23 E:23 Water in the base tub, appliance leaking. - Page 26 Faults and what to do about them. Faults Cause/remedial action The programme duration Not a fault – the programme sequence is optimised for the particular washing changes during the wash process. This may lead to changes in the programme duration in the display cycle.
-
Page 27: After-Sales Service
After-sales service After-sales service If you cannot correct the fault yourself, A f t e r - s a l e s s e r v i c e (see section, Faults and what to do about them) ~ Page 24, please contact our after-sales service. -
Page 28: Consumption Rates
Consumption rates Consumption rates Energy and water consumption, programme duration and C o n s u m p t i o n r a t e s residual moisture for the main washing programmes (approximate values) Programme Load Energy consumption* Water* Programme duration* Cotton 20 °C... -
Page 29: Efficiency Test Programmes For Cotton Fabrics
Technical data Efficiency test programmes for cotton fabrics The following programmes (standard cotton fabrics and are the most efficient programmes, indicated by ü) are with respect to combined energy and suitable for cleaning normally soiled water consumption. Standard programmes for cottons in accordance with regulation Load Programme du- (EU) no. -
Page 30: Positioning And Connecting
Positioning and connecting P Water supply hose on standard/Aqua- Positioning and Secure models connecting *depending on the model Included with the appliance In addition, a hose clamp ( 24 - 40 mm P o s i t i o n i n g a n d c o n n e c t i n g diameter, available from specialist Check the machine for transport Note:... -
Page 31: Installation Surface
Positioning and connecting leaks and water damage, you must Do not remove the appliance covering follow the instructions in this section. plate. Notes Notes In addition to the safety information Recess width of 60 cm required. ■ ■ listed here, the local water and Only install the washing machine ■... -
Page 32: Hose And Cable Lengths
Positioning and connecting Unscrew and remove all four transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. Fit the covers. Lock the covers firmly The following are available from Tip: in place by applying pressure to the specialist dealers/the after-sales snap-in hooks. -
Page 33: Water Outlet
Positioning and connecting Only tighten the screw connections Open the water tap carefully, Note: ■ by hand. If the screw connections checking the leak tightness of the are tightened too much with a tool connection points. The screw (pliers), the thread may be connection is under mains water damaged. -
Page 34: Levelling
Positioning and connecting In doing so, hold the foot tight and do not adjust its height. The lock nuts on all four appliance feet must be screwed tightly against the housing. Drainage into a siphon ■ The connection point must be secured using a hose clamp with a diameter of 24-40 mm (available from specialist dealers). -
Page 35: Before Washing For The First Time
Positioning and connecting The mains cable is only replaced by To prevent foaming, only use Note: ■ a qualified electrician (if this is half of the amount of detergent necessary). Replacement mains recommended by the detergent cables are available from the after- manufacturer. - Page 36 Positioning and connecting Before initial use: Notes The transport locks must be ■ removed. To prevent unused detergent from ■ flowing straight into the drain during the next wash: Pour approximately 1 litre of water into compartment II and select and start the [ Empty programme.
- Page 38 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) You can find the contact information for all countries in the attached after-sales service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com *9001037619* 9001037619 (9511)