Table of Contents
Advertisement
Servo-hydraulic actuator
14 / 85
Product-specific safety instructions
Bosch Rexroth AG
High voltage above 50 V! Danger to life and risk of injury
WARNING
caused by electric shock.
−
De-energize the servo-hydraulic actuator before instal-
lation, pulling and connecting connectors and all
other work.
−
Secure the electrical equipment against restarting.
Use inspected measuring equipment to verify that
there is no voltage applied.
−
Before switching the control system on, check the
protective conductor on all electrical devices for
proper connection according to the wiring diagram.
−
Measure the electric voltage of electrical parts before
beginning work in order to avoid hazards caused by
contact.
−
After switching off, wait until the capacitors have dis-
charged below the permissible voltage of 50 V. The
components of the drive system Rexroth IndraDrive
are dimensioned so that after the supply voltage was
turned off, the voltage falls below 50 V within the dis-
charge time of max. 30 minutes.
−
Never touch electrical connection points of the com-
ponents while power is turned on.
Danger due to hydraulic fluid under pressure! Danger of
WARNING
poisoning and risk of injury (e.g. eye injuries, skin
lesions, poisoning due to inhalation and ingestion).
−
Check the lines for wear and damage before any com-
missioning.
−
Use personal protective equipment (e.g. safety gog-
gles, protective gloves, suitable workwear, safety
shoes, etc.)
−
If nevertheless hydraulic fluid comes into contact with
the eyes or penetrates the skin, please consult a
doctor immediately.
−
When handling hydraulic fluids, strictly observe the
safety notes of the hydraulic fluid manufacturer.
Hot surfaces! Risk of burning. The servo-hydraulic
WARNING
actuator heats up considerably during operation. Indi-
vidual components of the servo-hydraulic actuator can
get so hot during operation that you may burn yourself.
−
Let the servo-hydraulic actuator cool down before
touching it.
−
Protect yourself by wearing heat-resistant protective
clothing, e.g. gloves.
Combustible hydraulic fluid! Risk of fire.
WARNING
−
Keep open fire and ignition sources away from the
servo-hydraulic actuator.
−
Ensure sufficient ventilation.
−
Do not carry out welding work on or in the vicinity of
servo-hydraulic actuator.
RE62270-B, 01.21
Advertisement
Table of Contents
