Chapter 4 Troubleshooting; Diagnosing Problems; Switch Post Results - Cisco ME 3400E Hardware Installation Manual

Cisco systems ethernet access switch installation guide

Hide thumbs Also See for Cisco ME 3400E:

Table of Contents

Troubleshooting

•

The LEDs on the front panel provide troubleshooting information about the switch. They show power-on

self-test (POST) failures, port-connectivity problems, and overall switch performance. You can also get

statistics from the CLI or from an SNMP workstation. See the software configuration guide and the

switch command reference on Cisco.com or the documentation that came with your SNMP application

for more information.

As the switch powers on, it begins the POST, a series of tests that runs automatically to ensure that the

switch functions properly. It might take several minutes for the switch to complete POST.

When the switch begins POST, the System LED blinks green, and the other LEDs remain solid green.

When POST succeeds, the System LED becomes solid green. The other LEDs turn off and return to their

operating status. If the switch fails POST, the System LED is solid amber.

You can use the show diagnostics post user EXEC command to display the POST results.

POST failures are usually serious. Contact your Cisco technical support representative if your switch

Note

does not pass POST.

OL-16447-01

Diagnosing Problems, page 4-1

Clearing the Switch IP Address and Configuration, page 4-4

Finding the Switch Serial Number, page 4-5

C H A P T E R

Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide

4-1

Table of Contents