Cisco ME 3400E Hardware Installation Manual page 64

Cisco systems ethernet access switch installation guide

Hide thumbs Also See for Cisco ME 3400E:

Table of Contents

Power-Supply Module Installation

Figure 3-18

Return (positive) Feed A

Supply (negative) Feed A

Use a ratcheting torque screwdriver to torque the terminal block captive screw (above the installed wire

Step 6

lead) to 4.5 in-lb (see

Caution

Do not overtorque the terminal-block captive screws. The recommended maximum torque is 4.5 in-lb.

Figure 3-19

Torque to 4.5 in-lb

Repeat

Step 7

completed wiring of a terminal block plug.

Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide

3-14

Inserting Wires in the Terminal Block Plug

Figure

3-19).

Torquing the Terminal-Block Captive Screws

Step 5

and

Step 6

for the remaining three DC-input power source wires.

Chapter 3

Installing and Removing AC- and DC-Power-Supply Modules

Return (positive) Feed B

Supply (negative) Feed B

Figure 3-20

shows the

OL-16447-01

Table of Contents