Cisco ME 3400E Hardware Installation Manual page 65

Cisco systems ethernet access switch installation guide

Hide thumbs Also See for Cisco ME 3400E:

Table of Contents

Chapter 3

Installing and Removing AC- and DC-Power-Supply Modules

Figure 3-20

Return (positive) Feed A

Supply (negative) Feed A

Insert the terminal block plug in the terminal block header on the switch front panel. (See

Step 8

Secure the wires coming in from the terminal block so that they cannot be disturbed by casual contact.

Caution

For example, use tie wraps to secure the wires to the rack.

Figure 3-21

Secure the terminal block by using the screws on the far left and right of the terminal block.

Step 9

Step 10

Remove the tape from the circuit-breaker switch handle, and move the circuit-breaker handle to the

ON position.

Move the DC-power source circuit-breaker handles to the ON position.

Step 11

OL-16447-01

Completed Wiring of Terminal Block Plug for Telecom Applications

Return (positive) Feed B

Supply (negative) Feed B

Inserting the Terminal Block in the Block Header

Cisco ME 3400E Ethernet Access Switch Hardware Installation Guide

Power-Supply Module Installation

Figure

3-21).

3-15

Table of Contents