Using Your High-Efficiency Low-Water Washer
1
ADD HE DETERGENT
Follow manufacturer's
instructions to determine amount
of laundry products to use.
4
ADD FABRIC SOFTENER
If desired.
Without Dispenser
6
SELECT WASH TEMP
9
ADD A GARMENT
NOTE: See "Cycle Guide" in the Use and Care Guide for more information about cycles, settings, and options.
Not all cycles, settings, and options are available with all models. Read your Use and Care Guide before using your washer.
W10783949A
W10783950A-SP
© 2015. All rights reserved.
Quick Start Guide
2
LOAD THE WASHER
Add fabric softener during the final rinse.
Press START/PAUSE to pause the washer.
Lift lid and add measured recommended
amount of liquid fabric softener. Close lid
and press START/PAUSE button again to
start the washer.
7
CYCLE OPTIONS
Options vary by model.
During Fill/Sensing, open the lid, add a garment,
close the lid, and press START.
NOTE: Washer will not fill with lid open.
IMPORTANT: If lid is left open for more than
10 minutes, the wash cycle will cancel and the
water will pump out.
3
ADD BLEACH
If desired.
5
SELECT CYCLE
Cycles vary by model.
8
PRESS START
Press and release to start.
NOTE: If you hold Start for more
than 3 seconds, it will cancel your
cycle and drain the washer.
10
CANCELING
WASH CYCLE
Hold START for more than
3 seconds to cancel your cycle
and drain the washer.
Printed in U.S.A.
04/15