Table of Contents
Advertisement
Available languages
Available languages
Symptoms
Washing machine
will not operate.
Reason
Control panel has powered
off due to inactivity.
Washing machine is
unplugged.
Water supply is turned off.
Controls are not set properly.
Door or drawer is open.
Circuit breaker/fuse is
tripped/blown.
Control needs to be reset.
Start/Pause was not pressed
after a cycle was set.
Extremely low water
pressure.
Washing machine is too cold.
Solution
• This is normal. Press the Power button
to turn the washing machine on.
• Make sure cord is plugged securely into
a working outlet.
• Turn the cold water tap fully on.
• Make sure the cycle was set correctly,
close the door and press the Start/Pause
button.
• Close the door and drawer make sure
that nothing is caught under the door
preventing it from closing completely.
• Check house circuit breakers/fuses.
Replace fuses or reset breaker. The
washing machine should be on a
dedicated branch circuit. The washing
machine will resume the cycle where it
stopped once power is restored.
• Press the Power button, then re-select
the desired programme and press the
Start/Pause button.
• Press the Start/Pause button with control
panel of Main Washer or remote control
after closing the drawer.
• When using the control panel of Mini
Washer, press the Start/Pause button
and close the drawer within 5 seconds.
• Check another tap in the house to make
sure that household water pressure is
adequate.
• If the washing machine has been
exposed to temperatures below freezing
for an extended period of time, allow it to
warm up before pressing the Power
button.
EN
33
Advertisement
Chapters
Table of Contents
