Unpacking The Delivery - ABB ACQ580-04 Hardware Manual
Drive modules
Hide thumbs
Also See for ACQ580-04:
- Quick installation manual (66 pages) ,
- User manual (22 pages) ,
- Manual (16 pages)
Table of Contents
Advertisement
A
CCU-24 control unit
1
1 × 24 V power supply cable (with a ground con-
nection)
2
2 × Safe Torque Off (STO) cables
The connectors at the drive module end are located behind the middle front cover.
Unpacking the delivery
The external control unit is in a separate box inside the main drive module box.
The control cables that will connect the external control unit to the drive module are connected
to the drive module for safe transit. ABB recommends that you disconnect them before you
install the drive module:
1. Remove the middle front cover of the drive module.
2. Disconnect the cables. Then, carefully pull them out via the rubber grommet. Wind the
cables carefully into the plastic bag supplied, ready for installation later.
)
1
V20
2
V10
BPOW
BGDR
SOIA
g
External control unit (option +P906) 189
B
Drive module
3
1 × pair of optical cables for all major converter
power stack communication.
4
CAT 5e cable, must be ordered separately
M4×8 Torx T20
2 N·m (18 lbf·in)
3
BPOW
4
BGDR
Advertisement
Table of Contents
