Table of Contents
Advertisement
7.13 Changing the Network Parameter
Set a network parameter from the Storage Navigator-Modular.
Note: If the network parameter is changed for the array unit connected to the NAS unit, the
cluster between the NAS Units stops. When the network parameter for the array subsystem
is unavoidably changed, execute it after stopping the cluster between the NAS Units and
stopping the NAS OS of both NAS Units. Start the cluster between the NAS Units again after
completing the network parameter change for the array subsystem.
To change a network parameter:
1. Turn on the power supply.
2. Start the Storage Navigator Modular and set the operation mode in Management Mode.
Refer to the Acer | HDS Adaptable Modular Storage and Workgroup Modular Storage
Navigator Modular Graphical User Interface (GUI) User's Guide.
3. Click the icon of an array unit on the Main window, and then select the File menu. Click
Open. Alternatively, click Display Details on the tool bar:
Acer | HDS AMS200 User and Reference Guide
187
Advertisement
Table of Contents
Troubleshooting
