Table of Contents
Advertisement
The following table lists and describes the basic specifications of RKNAS.
Table C.2
Items
Configuration
Physical specifications
Input power specifications
Note 1: No noise is emitted during start-up.
Note 2: The start-up time may be longer than three minutes depending on the configuration.
Note 3: Power requirement in the case of the maximum configuration is shown. When
planning facilities such as the uninterrupted power supply (UPS), specify the power factor as
100% for calculation. Value at 100 V/200 V is shown.
(Example: 300 W=300 VA)
The actual required power may exceed the value shown in the table when the tolerance is
included.
296
Appendix C Basic Specifications of the Subsystem
Basic Specifications of RKNAS
Configuration
Subsystem appearance
Start-up time (min)
Chassis size (W×D×H) (mm)
Mass (kg)
Acoustic noise (dB) (Note 1)
Required height (EIA unit) (Note 2)
Input voltage (V)
Frequency (Hz)
Number of phases, cabling
Steady-state current (A)
Breaking current (A)
Heat value (kJ/h)
Required power
RKNAS Specifications
1 RKNAS
Standard: 3 (Note 3)
483×650×43
15 approx.
60 approx.
1
AC 100/200 (100 to 120/200 to 240)
50/60 ±1
Single-phase with protective grounding
2.0/1.4
10.0
1,010 or less
Steady state (VA)
280 or less
Starting state (VA)
280 or less
(Note 4)
Advertisement
Table of Contents
Troubleshooting
