Related Manuals for Siemens WM14N29IDN
Summary of Contents for Siemens WM14N29IDN
- Page 1 WM14N29IDN Washing machine EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
Further information and explanations are available online: Table of contents 1 Safety ........... 4 8 Buttons ........ 21 1.1 General information.... 4 9 Programmes ...... 22 1.2 Intended use...... 4 1.3 Restriction on user group.. 4 10 Accessories...... 26 1.4 Safe installation ...... 5 11 Laundry........ 26 1.5 Safe use ........ - Page 3 15 Basic settings...... 30 15.1 Overview of the basic set- tings........ 30 15.2 Changing the basic set- tings........ 31 16 Cleaning and servicing ... 31 16.1 Cleaning the drum.... 31 16.2 Cleaning the detergent drawer........ 31 16.3 Cleaning the drain pump.. 32 17 Troubleshooting...... 36 17.1 Emergency release ....
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe ¡ for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the ▶ specifications on the rating plate. Connect the appliance to a power supply with alternating cur- ▶ rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in- ▶... - Page 6 en Safety WARNING ‒ Risk of injury! The heavy weight of the appliance may result in injury when lifted. Do not lift the appliance on your own. ▶ If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. Only stack the dryer on a washing machine using the connec- ▶...
-
Page 7: Safe Use
Safety en Wear protective gloves when installing and transporting the ap- ▶ pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always ▶... - Page 8 en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. ▶ WARNING ‒ Risk of explosion! Laundry that has been pretreated with flammable cleaning agents that contain solvents may cause an explosion in the appliance.
-
Page 9: Safe Cleaning And Maintenance
Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its ▶ features. Repairs to the appliance should only be carried out by trained ▶ specialist staff. Only use genuine spare parts when repairing the appliance. ▶... -
Page 10: Preventing Material Damage
en Preventing material damage If the water pressure is too high or Preventing material damage 2 Preventing material too low, the appliance may not be able to operate properly. damage Ensure that the water pressure in ▶ the water supply system is at least Preventing material damage ATTENTION! 100 kPa (1 bar) and max. -
Page 11: Environmental Protection And Saving Energy
Environmental protection and saving energy en Environmental protection and saving energy Installation and connection 3 Environmental protec- 4 Installation and con- tion and saving energy nection Environmental protection and saving energy Installation and connection 3.1 Disposing of packaging 4.1 Unpacking the appliance The packaging materials are environ- ATTENTION! mentally compatible and can be re- Objects remaining in the drum that... -
Page 12: Requirements For The Install- Ation Location
en Installation and connection Replace the accessories in ques- ATTENTION! ▶ tion before operating the appli- If residual water in the appliance ance. freezes, this may cause damage to → "Accessories", Page 26 the appliance. Do not install or operate this appli- ▶ Note: The appliance has undergone ance anywhere that is liable to ex- a function test at the factory. -
Page 13: Removing The Transit Bolts
Installation and connection en Unscrew and remove all of Installation loca- Requirements the screws for the 4 transit bolts tion using a WAF 13 wrench. Against a wall Do not trap the power cord or the hoses between the wall and the appli- ance. -
Page 14: Connecting The Appliance
en Installation and connection Put on the 4 cover caps. Connect the water inlet hose to a tap (26.4 mm = 3/4"). Push the 4 cover caps downwards. When connecting to a 21 mm = ½" tap, first fit the adapter with a seal- ing washer. -
Page 15: Aligning The Appliance
Installation and connection en In the event of a blocked or covered The connection details of the appli- outlet, accumulated wastewater can ance can be found under Tech- flow back into the appliance. nical data → Page 44. Before operating the appliance, en- ▶... -
Page 16: Before Using For The First Time
en Before using for the first time Use a WAF 17 wrench to tighten Pour approx. 1 litre of tap water the lock nuts against the housing into compartment II. until they are hand-tight. Add washing powder containing In doing so, hold the foot tight and oxygen bleach to compartment II. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en Familiarising yourself with your appliance 6 Familiarising yourself with your appliance Familiarising yourself with your appliance 6.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. -
Page 18: Control Panel
en Familiarising yourself with your appliance Measuring aid for liquid deter- gent → "Inserting the measuring aid", Page 28 Compartment II: Detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash 6.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. -
Page 19: Display
Display en Display 7 Display The display shows the current settings, options or relevant information. Display Depending on the programme status, the display shows some information in area, e.g. . Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. - Page 20 en Display Display Description Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ¡ ance has been operated. → "Deactivating the childproof lock", Page 30 Prewash is activated. → "Buttons", Page 21 Washing with additional water and a rinse cycle is activ- ated.
-
Page 21: Buttons
Buttons en Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection More information Start Start, cancel or pause the pro- ¡ gramme. Cancel ¡ Pause ¡ Activate Activate or deactivate a shorter pro- ¡... -
Page 22: Programmes
en Programmes Programmes 9 Programmes Programmes Notes The laundry's care labels provide you with additional information about pro- ¡ gramme selection. For programmes with a temperature setting of 80 °C or 90 °C, the actual ¡ temperature may deviate from the specified temperature. The washing effect and hygiene expected at the specified temperatures is nevertheless achieved. - Page 23 Programmes en Programme Description Max. load (kg) Finvask / Silke Wash delicate, washable items made from silk, vis- (Delicate / Silk) cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag.
-
Page 24: Laundry
en Programmes Programme Description Max. load (kg) Programme setting: Max. 60 °C ¡ Max. 800 rpm ¡ Outdoor Wash all-weather and outdoor clothing with mem- brane technology and water-resistant equipment. Use a detergent for outdoor fabrics. Do not use fabric softener. Programme setting: Max. - Page 25 Programmes en Programme Description Max. load (kg) If you regularly wash at temperatures of 40 °C or ¡ lower After a prolonged period of non-use ¡ Use washing powder containing oxygen bleach. Add the washing powder containing oxygen bleach to compartment II for the main wash. → Page 17 Halve the amount of detergent to avoid foaming.
-
Page 26: Preparing The Laundry
en Accessories Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 43. Order num- Water inlet hose ex- Extend the water inlet hose for cold water WZ10131 tension or AquaStop (approx. -
Page 27: Detergents And Care
Detergents and care products en Turn the programme selector and Detergents and care products 12 Detergents and care set the required programme. → "Programmes", Page 22 products If required, adjust the programme You can protect your appliance and Detergents and care products settings. your laundry by selecting and using → "Buttons", Page 21 the correct detergents and care The programme settings are not... -
Page 28: Inserting The Measuring Aid
en Basic operation Requirements 13.6 Using the measuring aid The laundry is prepared and sor- ¡ To more easily measure the liquid ted. detergent, you can use a measuring → "Laundry", Page 26 aid in the detergent drawer. The drum is empty. ¡ Note: Do not use a measuring aid for Open the door. -
Page 29: Adding Detergent And Care Product
Basic operation en 13.7 Adding detergent and 13.10 Adding laundry care product After the programme starts, you can remove or add laundry depending on Note: Observe the information about the programme status. detergents and care products Press . → Page 27. The appliance pauses. Pull out the detergent drawer. Note: If you want to add laundry, If required, use the dosing aid. -
Page 30: Unloading The Laundry
en Childproof lock Set the Centrifugering (Spin) pro- The display shows . gramme or a programme for drain- The control elements are locked. ing the water. → Page 22 The childproof lock remains active even after the appliance has been Press . switched off and in the event of a power cut. -
Page 31: Changing The Basic Set- Tings
Cleaning and servicing en or if you have not used the appliance Set the volume of the signal for a prolonged period, but at least at the end of the programme: once a year. 0 (off) to 4 (very loud) Set the volume of the signal CAUTION tone emitted when the but- Risk of injury! -
Page 32: Cleaning The Drain Pump
en Cleaning and servicing Pull out the insert upwards. Clean the opening for the deter- gent drawer. Clean the detergent drawer and in- sert with water and a brush, and Push in the detergent drawer. then dry them. 16.3 Cleaning the drain pump Clean the drain pump regularly, at least once a year, as well as in the event of faults, e.g. - Page 33 Cleaning and servicing en Slide a suitable receptacle under CAUTION - Risk of scalding! the opening for draining the deter- When you wash at high temperat- gent solution. ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
- Page 34 en Cleaning and servicing Insert the drain hose into the Clean the interior, the thread on holder. the pump cap and the pump hous- ing. Cleaning the drain pump Ensure that the impeller in the drain pump can rotate. Requirement: The drain pump is empty.
- Page 35 Cleaning and servicing en Screw the pump cap as far as it Pour 1 litre of water into compart- will go. ment II. Select a suitable programme for draining. → "Programmes", Page 22 The handle on the pump cap must be in a vertical position. Insert and close the maintenance flap.
-
Page 36: Troubleshooting
en Troubleshooting Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its features. ▶... - Page 37 Troubleshooting en Fault Cause and troubleshooting E:30 -10 / The tap is turned off. Turn on the tap. ▶ The water inlet hose is kinked or jammed. Check the installation of the water inlet hose. ▶ → Page 14 The filters in the water inflow are blocked. Clean the filters in the water inflow.
- Page 38 en Troubleshooting Fault Cause and troubleshooting All other error codes. Malfunction Restart the appliance. If the fault occurs again, disconnect the appliance from the power supply for at least 30 seconds. Unplug the appliance from the mains or switch off the circuit breaker in the fuse box. If the fault persists, call customer service.
- Page 39 Troubleshooting en Fault Cause and troubleshooting Drum jerks after the Not a fault. An internal motor test is started. programme starts. No action required. Drum rotates, water Not a fault. Load detection is active for up to 2 does not flow in. minutes.
- Page 40 en Troubleshooting Fault Cause and troubleshooting The laundry is too wet A low spin speed is selected. after the spinning Start the Centrifugering (Spin) programme. ▶ cycle. The next time you run a wash cycle, set a higher ▶ spin speed. The appliance is using a reduced spin speed to elim- inate an imbalance.
- Page 41 Troubleshooting en Fault Cause and troubleshooting Fabric softener re- The use of fabric softener is not supported for the se- mains in the detergent lected programme. drawer. Check whether the use of fabric softener is suppor- ▶ ted for the selected programme. → Page 22 Odours have formed Humidity and detergent residue may promote the in the appliance.
-
Page 42: Emergency Release
en Transportation, storage and disposal 17.1 Emergency release 18.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 32 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage. -
Page 43: Disposing Of Old Appliance
Customer Service en 18.4 Disposing of old appli- Customer Service 19 Customer Service ance Function-relevant genuine spare parts Customer Service Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health! - Page 44 en Consumption values Consumption values 20 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the Eco 40-60 are indicat- ive only and were determined in accordance with the applicable standard EN60456.
-
Page 45: Technical Data
Technical data en Appliance depth 106.3 cm with door open Weight 70.4 kg Maximum load 9.0 kg Mains voltage 220-240 V, 50 Hz Minimum in- 10 A stallation protec- tion Nominal power 2300 W Power consump- Off mode: ¡ tion 0.15 W Left-on mode: ¡ 0.50 W Water pressure Minimum: ¡... - Page 48 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...