Show Platform Ip Wccp - Cisco Catalyst 3560X-24P Command Reference Manual
Cisco ios release 12.2(55)se
Hide thumbs
Also See for Catalyst 3560X-24P:
- Technical specifications (6 pages) ,
- Datasheet (29 pages)
Table of Contents
Advertisement
Appendix C
Catalyst 3750-X and 3560-X Show Platform Commands
show platform ip wccp
Use the show platform ip wccp privileged EXEC command to display platform-dependent Web Cache
Communication Protocol (WCCP) information.
Note
This command is available only if your switch is running the IP services feature set.
Syntax Description
detail
label
| begin
| exclude
| include
expression
Command Modes
Privileged EXEC
Command History
Release
12.2(53)SE2
Usage Guidelines
You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
OL-21522-02
show platform ip wccp {detail | label} [ | {begin | exclude | include} expression]
Display the platform WCCP details.
Display the platform WCCP labels.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Catalyst 3750-X and 3560-X Switch Command Reference
show platform ip wccp
C-17
Advertisement
Table of Contents
