Cisco ME 3400 Software Configuration Manual page 921
Ethernet access switch
Hide thumbs
Also See for ME 3400:
- Command reference manual (950 pages) ,
- Hardware installation manual (88 pages) ,
- Getting started manual (33 pages)
Table of Contents
Advertisement
Chapter 41
Configuring Ethernet OAM, CFM, and E-LMI
Command
Step 10
threshold milliseconds
Step 11
timeout milliseconds
Step 12
exit
Step 13
ip sla schedule operation-number [ageout seconds]
[life {forever | seconds}] [recurring] [start-time
{hh:mm {:ss} [month day | day month] | pending |
now | after hh:mm:ss}]
Step 14
end
Step 15
show ip sla configuration [operation-number]
Step 16
copy running-config startup-config
To remove an IP SLAs operation, enter the no ip sla operation-number global configuration command.
OL-9639-07
Purpose
(Optional) Specify the upper threshold value in
milliseconds (ms0 for calculating network monitoring
statistics. The range is 0 to 2147483647; the default is
5000.
(Optional) Specify the amount of time in ms that the IP
SLAs operation waits for a response from its request
packet. The range is 0 to 604800000; the default value is
5000.
Return to global configuration mode.
Schedule the time parameters for the IP SLAs operation.
operation-number—Enter the IP SLAs operation
•
number.
(Optional) ageout seconds—Enter the number of
•
seconds to keep the operation in memory when it is not
actively collecting information. The range is 0 to
2073600 seconds. The default is 0 seconds.
(Optional) life—Set the operation to run indefinitely
•
(forever) or for a specific number of seconds. The
range is from 0 to 2147483647. The default is 3600
seconds (1 hour)
(Optional) recurring—Set the probe to be
•
automatically scheduled every day.
(Optional) start-time—Enter the time for the
•
operation to begin collecting information:
To start at a specific time, enter the hour, minute,
–
second (in 24-hour notation), and day of the
month.
Enter pending to select no information collection
–
until a start time is selected.
–
Enter now to start the operation immediately.
Enter after hh:mm:ss to show that the operation
–
should start after the entered time has elapsed.
Return to privileged EXEC mode.
Show the configured IP SLAs operation.
(Optional) Save your entries in the configuration file.
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
Configuring Ethernet CFM
41-11
- Quick Links:
- Performance Features
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
